WinstonIII
New member
tractor idles and wide open just fine until i move trans lever in low or high range or when i engage pto tries to go dead .....
BX2230 runs great until.......
- Thread starter WinstonIII
- Start date
B2400
Platinum Member
- Joined
- Jun 13, 2003
- Messages
- 576
- Location
- Western Illinois
- Tractor
- 2016 B2650 ROPS, 1998 B2400 (sold!)
One of the safety switches is out of adjustment. Check the seat switch first
OP
WinstonIII
New member
B2400 said:
Thanks B2400 out of curiosity just how many safety switches on the Bx2230?
Dusty
Veteran Member
- Joined
- May 13, 2000
- Messages
- 1,080
- Tractor
- bx22
WinstonIII said:
Safety switch under the seat, on the transmission selector, and the PTO selector. Not having a BX2230, I have pointed out the most common safety switches. Yours might have additional switches that I am not aware of, but the principle remains the same. I haven't gotten into any of these units, but my guess is that it is some form of micro switch and is easily defeated for testing purposes with a jumper wire. Once you figure out which switch is giving you the problem, then analyze how it works and see if you can adjust it to work properly. Test after making any adjustments to make sure that your adjustment hasn't disabled the switch entirely. By using the jumper wire, you don't disturb the adjustment and try adjusting the wrong switch. Dusty