Results 1 to 7 of 7
  1. #1

    Default B7100 Wiring problem

    I recently had a rodent make a nest under the hood of my B7100. It chewed thru the wiring harness. I've rewired all except 2 wires. Since I don't have a wiring diagram I need a little help to verify how the last 2 wires connect. One is the red wire from the rectifier and the other is the red wire from the flasher. I think both go to the hot terminal on the ignition switch but would like verification or a copy of a wiring diagram would be helpful.
    Thanks.

  2. #2
    Member
    Join Date
    Feb 2003
    Posts
    46
    Tractor
    Kubota B7100

    Default Re: B7100 Wiring problem

    HI there.

    attached is a copy of the B7100 wiring diagram. I have sent it as a photo jpeg, , the hand writtten bits are my additions to the tractor so feel free to ignore them
    I hope it helps
    Mat
    Attached Images Attached Images

  3. #3
    Member
    Join Date
    Feb 2003
    Posts
    46
    Tractor
    Kubota B7100

    Default Re: B7100 Wiring problem

    Hi there again!

    If you need a higher resolution copy of the photo , If you let me know your email address i can email one direct to you as i had to reduce the picture size to get it on to the forum

    Mat

  4. #4
    Veteran Member Dusty's Avatar
    Join Date
    May 2000
    Posts
    1,051
    Tractor
    bx1800

    Default Re: B7100 Wiring problem

    How long was the tractor idle that they were able to do that amount of damage? Usually they will just nest, but not chew wires, unless they get real hungry. Some people say that they chew the wires, because the current flowing through their bodies warms them, but I have never been able to verify if this is an old wives tale or not.
    Dusty

  5. #5

    Default Re: B7100 Wiring problem

    It was only idle a few days but I've had the tractor for 12 years and never had a problem. The rodent filled under the hood with nesting material and completely chewed thru the wiring harness.

    Bob

  6. #6

    Default Re: B7100 Wiring problem

    Thanks to Mat for the wiring diagram. I am back in operation. Just in time since we had 5-6" of snow today.

    Bob

  7. #7
    New Member
    Join Date
    Jul 2012
    Posts
    1
    Location
    cali
    Tractor
    kubota

    Default Re: B7100 Wiring problem

    Hi Mat
    I'd appreciate you send me the electrical diagram of B7100,
    with a higher resolution copy of the photo, if you have it on paper would be better.
    my email is GEMELOALEJO182@HOTMAIL.COM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.