Results 1 to 4 of 4
  1. #1

    Default Fecon BH Teeth source?

    Hi guys, just bought a 2007 Fecon FTX140 with the BH85 head and needing a good source of carbide teeth (standard tool) , preferably in the Florida area.
    Also, is it better to have both single and double carbide teeth or just go straight with a full double carbide set?

    Thank you.

    Tomas.

  2. #2
    New Member
    Join Date
    Jul 2011
    Posts
    20

    Default Re: Fecon BH Teeth source?

    Call FECON parts department, they will be glad to help you out 800-528-3113

  3. #3
    New Member
    Join Date
    Jul 2011
    Posts
    20

    Default Re: Fecon BH Teeth source?

    Tomas:
    I am the Fecon SE Region Manager, please feel free to call me at 800-528-3113. We will make sure you get the correct tools for your unit and set up with a local dealer.
    Best Regards,
    Frank Plotts
    800-528-3113

  4. #4
    Gold Member cat 297c's Avatar
    Join Date
    Mar 2009
    Posts
    406
    Location
    Semmes, Alabama
    Tractor
    Cat 299D XHP, Cat 297c, Rayco C140

    Default

    I would go with single and double set up that way you have the singles to help cut larger material but still have doubles to help mulch the material up better, or try Quadco teeth I run them have no complaints I had the chippers on my 140 an man there was nothing it wouldn't cut!!!
    Lifescapes Forestry Mulching/ Brush Cutting Services
    251-331-4475
    lifescapes-forestry-mulching.com

Similar Threads

  1. Stone teeth for Fecon mulcher???????
    By tonyoz in forum Land Clearing Equipment
    Replies: 23
    Last Post: 05-24-2013, 02:24 PM
  2. Backhoe Bucket Tooth Wear
    By jinman in forum Construction Equipment
    Replies: 66
    Last Post: 05-22-2012, 06:17 PM
  3. Teeth for mini excavator ???
    By Kays Supply in forum Construction Equipment
    Replies: 4
    Last Post: 05-08-2009, 06:45 AM
  4. Fecon Bullhog vs. Loftness Carbide Cutter Comparison
    By burnetma in forum Land Clearing Equipment
    Replies: 41
    Last Post: 02-14-2007, 07:56 PM
  5. Digging bucket ideas and source for teeth?
    By jimgerken in forum Build-It Yourself
    Replies: 3
    Last Post: 12-06-2006, 05:27 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.