Results 1 to 6 of 6
  1. #1
    Veteran Member
    Join Date
    Oct 2011
    Posts
    1,885
    Location
    Monrovia, California
    Tractor
    Kubota BX25

    Default Any BX25 Owners Runnin' Flails ?

    DO you have a BX25 and are you running a flail?
    I sure would like your input if so, what flavor etc your
    runnin' and would you buy it again kinda thing...

    I have a job where I need to knock down and mulch
    several acres of brush, mostly 1" thick or so and under stuff.

    I am close to Gearmore Co. They have this;

    GML-41SH
    41" GML Flail Mower with Swing Hammers
    475 Lbs

    After that they have a 49" at 600 LBS



    I am thinking smaller would be wiser...but I could be wrong that
    is why I seek to find those running these things IRL and see
    if you have any input for me...

    Yes I could rent, but I throw money away...I can always use this down
    the road...

    TIA!
    Regards,

    Artisan

    Kubota 2012 BX25 (23H.P. / 17.7pto)
    14' Dump / Carson 12K Tow Trailer w/ movable Winch,
    Canopy, Tunes, Stabilizer Soft Pads, 10"-12"BH Buckets, FEL Grapple, Fasse Valved & Switched,
    Fire Extinguisher, ChainSaw Mount, Protective Surround / Enclosure in the works.

    Stayin' Alive (This click could save a life...)

  2. #2
    Veteran Member
    Join Date
    Oct 2011
    Posts
    1,885
    Location
    Monrovia, California
    Tractor
    Kubota BX25

    Default Re: Any BX25 Owners Runnin' Flails ?

    Better views;



    Regards,

    Artisan

    Kubota 2012 BX25 (23H.P. / 17.7pto)
    14' Dump / Carson 12K Tow Trailer w/ movable Winch,
    Canopy, Tunes, Stabilizer Soft Pads, 10"-12"BH Buckets, FEL Grapple, Fasse Valved & Switched,
    Fire Extinguisher, ChainSaw Mount, Protective Surround / Enclosure in the works.

    Stayin' Alive (This click could save a life...)

  3. #3
    Gold Member tonyoz's Avatar
    Join Date
    Sep 2009
    Posts
    342
    Location
    Queensland & Far South Coast NSW Australia
    Tractor
    Rayco

    Default Re: Any BX25 Owners Runnin' Flails ?

    It should be OK. There are other makes of mulchers that can be hitched either way if that is any advantage to you, Seppi is one of many manufractures that do this. I have a supplier who fits tungstin tiles on swinging hamers if the going gets tough.
    CTC Mulching
    Made a silk purse out of a Sows ear

  4. #4
    Veteran Member
    Join Date
    Oct 2011
    Posts
    1,885
    Location
    Monrovia, California
    Tractor
    Kubota BX25

    Default Re: Any BX25 Owners Runnin' Flails ?

    I was thinking about hammers and their wear as I woke
    up this AM. If there is a link to these "tungstin tiles" for
    swinging hammers I would like it please...
    Regards,

    Artisan

    Kubota 2012 BX25 (23H.P. / 17.7pto)
    14' Dump / Carson 12K Tow Trailer w/ movable Winch,
    Canopy, Tunes, Stabilizer Soft Pads, 10"-12"BH Buckets, FEL Grapple, Fasse Valved & Switched,
    Fire Extinguisher, ChainSaw Mount, Protective Surround / Enclosure in the works.

    Stayin' Alive (This click could save a life...)

  5. #5
    Gold Member tonyoz's Avatar
    Join Date
    Sep 2009
    Posts
    342
    Location
    Queensland & Far South Coast NSW Australia
    Tractor
    Rayco

    Default Re: Any BX25 Owners Runnin' Flails ?

    [URL="http://www.atcgroup.com.au"] they make them to fit Seppi mulchers so whatever you whatever you purchase has the same type and size you should be OK. ATC's products are good quality, been using their teeth on our forestry mulcher for 6yrs and the last doing 1000hrs and still going strong
    CTC Mulching
    Made a silk purse out of a Sows ear

  6. #6
    Veteran Member
    Join Date
    Oct 2011
    Posts
    1,885
    Location
    Monrovia, California
    Tractor
    Kubota BX25

    Default Re: Any BX25 Owners Runnin' Flails ?

    Thank You Tony!

    I went to ATC Group and sent off an email asking
    them foe a link and if they have replacement parts.
    Sure would be nice to have some super hammers
    I bet! I believe the ocasional rock would play helm
    on them!
    Regards,

    Artisan

    Kubota 2012 BX25 (23H.P. / 17.7pto)
    14' Dump / Carson 12K Tow Trailer w/ movable Winch,
    Canopy, Tunes, Stabilizer Soft Pads, 10"-12"BH Buckets, FEL Grapple, Fasse Valved & Switched,
    Fire Extinguisher, ChainSaw Mount, Protective Surround / Enclosure in the works.

    Stayin' Alive (This click could save a life...)

Similar Threads

  1. Mulcher Heads....What you runnin and WHY?
    By highmark in forum Land Clearing Equipment
    Replies: 39
    Last Post: 01-18-2012, 08:34 AM
  2. Dk50 back up n runnin.
    By whitmerlegacyfarm in forum Kioti Owning/Operating
    Replies: 1
    Last Post: 01-14-2012, 11:49 AM
  3. BX25 Owners Manual
    By savaytse66 in forum Kubota Owning/Operating
    Replies: 3
    Last Post: 03-06-2010, 07:54 PM
  4. Couple of questions for BX25/24 owners
    By MacTractor in forum Kubota Owning/Operating
    Replies: 11
    Last Post: 12-16-2009, 05:22 PM
  5. One last question on Flails toughness
    By millpond in forum Attachments
    Replies: 12
    Last Post: 08-04-2007, 05:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.