Any BX25 Owners Runnin' Flails ?

   / Any BX25 Owners Runnin' Flails ? #1  

Artisan

Veteran Member
Joined
Oct 9, 2011
Messages
1,959
Location
Monrovia, California
Tractor
Kubota BX25
DO you have a BX25 and are you running a flail?
I sure would like your input if so, what flavor etc your
runnin' and would you buy it again kinda thing...

I have a job where I need to knock down and mulch
several acres of brush, mostly 1" thick or so and under stuff.

I am close to Gearmore Co. They have this;

GML-41SH
41" GML Flail Mower with Swing Hammers
475 Lbs

After that they have a 49" at 600 LBS

GML1_cat.jpg


I am thinking smaller would be wiser...but I could be wrong that
is why I seek to find those running these things IRL and see
if you have any input for me...

Yes I could rent, but I throw money away...I can always use this down
the road...

TIA!
 
   / Any BX25 Owners Runnin' Flails ? #3  
:thumbsup:It should be OK. There are other makes of mulchers that can be hitched either way if that is any advantage to you, Seppi is one of many manufractures that do this. I have a supplier who fits tungstin tiles on swinging hamers if the going gets tough.
 
   / Any BX25 Owners Runnin' Flails ?
  • Thread Starter
#4  
I was thinking about hammers and their wear as I woke
up this AM. If there is a link to these "tungstin tiles" for
swinging hammers I would like it please...
 
   / Any BX25 Owners Runnin' Flails ?
  • Thread Starter
#6  
Thank You Tony!

I went to ATC Group and sent off an email asking
them foe a link and if they have replacement parts.
Sure would be nice to have some super hammers
I bet! I believe the ocasional rock would play helm
on them!
 
 
Top