Page 1 of 2 12 LastLast
Results 1 to 10 of 15
  1. #1
    Elite Member
    Join Date
    Feb 2012
    Posts
    4,040
    Location
    Holland, PA
    Tractor
    Kubota L5740, Case IH 255, Gravely 8199G

    Default any use for tree stumps?

    duplicate
    Last edited by daugen; 12-08-2012 at 03:19 PM. Reason: duplicate
    2012 Kubota L5740HSTC3 with FEL and Long grapple, 1986 Case IH 255, Land Pride PD10 PHD, Land Pride RCR60 & RCF2084 mowers, Land Pride 4' box blade and rear rake, Fred Cain subsoiler, County Line potato plow, County Line 1 bottom plow, 1986 Gravely 8199G with tow behind DR rototiller, 50" deck+40" Gravely wing mower, Gravely snowblower, Swisher 44 rough cut mower,Ariens snowblower, Echo 450-18 & 600-24, Echo PPT280, 2006 JD LX280, , 1968 Cub Cadet 125, Husky-Speeco 35 ton splitter

  2. #2
    Elite Member
    Join Date
    Feb 2012
    Posts
    4,040
    Location
    Holland, PA
    Tractor
    Kubota L5740, Case IH 255, Gravely 8199G

    Default Re: any use for tree stumps?

    any use for tree bottoms? Full of dirt which is seriously bad on the saw chain.
    Into the woods for a critter habitat?
    thanks
    Drew
    Attached Thumbnails Attached Thumbnails any use for tree stumps?-p1030275.jpg  
    2012 Kubota L5740HSTC3 with FEL and Long grapple, 1986 Case IH 255, Land Pride PD10 PHD, Land Pride RCR60 & RCF2084 mowers, Land Pride 4' box blade and rear rake, Fred Cain subsoiler, County Line potato plow, County Line 1 bottom plow, 1986 Gravely 8199G with tow behind DR rototiller, 50" deck+40" Gravely wing mower, Gravely snowblower, Swisher 44 rough cut mower,Ariens snowblower, Echo 450-18 & 600-24, Echo PPT280, 2006 JD LX280, , 1968 Cub Cadet 125, Husky-Speeco 35 ton splitter

  3. #3
    Bronze Member
    Join Date
    Jul 2012
    Posts
    58
    Location
    Goochland, Va
    Tractor
    Bobcat 773

    Default Re: any use for tree stumps?

    Solid tree stumps make a good base for an anvil - but you have to cut them flat.

  4. #4
    Elite Member
    Join Date
    Feb 2012
    Posts
    4,040
    Location
    Holland, PA
    Tractor
    Kubota L5740, Case IH 255, Gravely 8199G

    Default Re: any use for tree stumps?

    Quote Originally Posted by gwiley View Post
    Solid tree stumps make a good base for an anvil - but you have to cut them flat.
    good idea. Have some other humongous pieces cut flat luckily. I was wondering what to do with about six of them, what a pain to split.
    How about a modern stonehenge style seating area around a bonfire/fire pit? That's my best idea so far.
    almost makes we want to get an anvil... have a big vise with one, but not a real one, something at least a hundred pounds.

    Working with this wood makes me more interested in a portable saw mill. We have more firewood than we can use. Some of these downed trees could be nice in furniture, hate to just burn them all.
    Like the walnut. Split walnut looks like a beaver's chocolate ice cream cone, almost good enough to eat.
    2012 Kubota L5740HSTC3 with FEL and Long grapple, 1986 Case IH 255, Land Pride PD10 PHD, Land Pride RCR60 & RCF2084 mowers, Land Pride 4' box blade and rear rake, Fred Cain subsoiler, County Line potato plow, County Line 1 bottom plow, 1986 Gravely 8199G with tow behind DR rototiller, 50" deck+40" Gravely wing mower, Gravely snowblower, Swisher 44 rough cut mower,Ariens snowblower, Echo 450-18 & 600-24, Echo PPT280, 2006 JD LX280, , 1968 Cub Cadet 125, Husky-Speeco 35 ton splitter

  5. #5
    Gold Member
    Join Date
    May 2012
    Posts
    486
    Location
    NW Louisiana
    Tractor
    MF 35, Mahindra 4035

    Default Re: any use for tree stumps?

    What kind of stumps are they ? Walnut and maple can be rough cut into about a 6" X 6" X 3' and sold for rifle stock blanks...really high quality with lots of pattern and distinctive grain patterning can command top dollar...just a thought...

    Rich

  6. #6
    Elite Member
    Join Date
    Feb 2012
    Posts
    4,040
    Location
    Holland, PA
    Tractor
    Kubota L5740, Case IH 255, Gravely 8199G

    Default Re: any use for tree stumps?

    [QUOTE=Biggreenavalanche;3098771]What kind of stumps are they ? Walnut and maple can be rough cut into about a 6" X 6" X 3' and sold for rifle stock blanks...really high quality with lots of pattern and distinctive grain patterning can command top dollar...just a thought...

    the really big stuff is white oak, then it's a mix of poplar, evergreens, locust, walnut, not much maple I can see in these woods. Sometimes some cherry and apple but not here. Used to be a lot of dogwoods, that certainly makes nice firewood.
    But it's the larger pieces that can be sawed with my 24 bar in some kind of simple jig.
    I guess it would be best to wash/pressure wash the trunk before trying to cut it, lot of grit everywhere.
    2012 Kubota L5740HSTC3 with FEL and Long grapple, 1986 Case IH 255, Land Pride PD10 PHD, Land Pride RCR60 & RCF2084 mowers, Land Pride 4' box blade and rear rake, Fred Cain subsoiler, County Line potato plow, County Line 1 bottom plow, 1986 Gravely 8199G with tow behind DR rototiller, 50" deck+40" Gravely wing mower, Gravely snowblower, Swisher 44 rough cut mower,Ariens snowblower, Echo 450-18 & 600-24, Echo PPT280, 2006 JD LX280, , 1968 Cub Cadet 125, Husky-Speeco 35 ton splitter

  7. #7
    Super Star Member
    Join Date
    Jul 2011
    Posts
    14,431
    Location
    Yanceyville, North Carolina
    Tractor
    Kubota L4400

    Default Re: any use for tree stumps?

    Pine stumps are excellent sources for "Fat Lighter".
    The PUPIL who does not surpass his Master, fails his Master.

  8. #8
    Elite Member
    Join Date
    Feb 2012
    Posts
    4,040
    Location
    Holland, PA
    Tractor
    Kubota L5740, Case IH 255, Gravely 8199G

    Default Re: any use for tree stumps?

    Quote Originally Posted by creekbend View Post
    Pine stumps are excellent sources for "Fat Lighter".
    good idea.
    Fatwood, Fatwood Firestarter - Plow & Hearth

    buck to a buck fifty per pound. Hmmmm.

    I grew up two properties away from a reknown furniture maker, George Nakashima. Don't know how many of you ever heard of him, but I'm sure if you Google the name, his furniture will come up.
    I have his book, Soul of a Tree, and his ways of connecting to the tree from which the wood planks came. And an interesting vision and capability to design furniture with those unusual slabs of wood. Very expensive furniture, more
    like wooden artwork.

    My father always wanted his dining room table and chairs, but could never afford it. More important to send his kids to college, though George and his wife were quite sociable, getting invited to many local
    cocktail parties of the 50's and 60's, a far cry from when they were interred as Japanese Americans at the start of WWII.

    But what Nakashima taught me was that trees and lumber were a lot more than just sawdust and board feet. That board came from a tree with a soul. Or so Nakashima felt. Interesting guy.
    I think I'd better start on something easy like a straight tree trunk of moderate size vs. a stump. Now if I had a 48" bandsaw with a blade that never got dull and had arms like Paul Bunyan...only in my dreams.
    2012 Kubota L5740HSTC3 with FEL and Long grapple, 1986 Case IH 255, Land Pride PD10 PHD, Land Pride RCR60 & RCF2084 mowers, Land Pride 4' box blade and rear rake, Fred Cain subsoiler, County Line potato plow, County Line 1 bottom plow, 1986 Gravely 8199G with tow behind DR rototiller, 50" deck+40" Gravely wing mower, Gravely snowblower, Swisher 44 rough cut mower,Ariens snowblower, Echo 450-18 & 600-24, Echo PPT280, 2006 JD LX280, , 1968 Cub Cadet 125, Husky-Speeco 35 ton splitter

  9. #9
    Gold Member BuzzardA91's Avatar
    Join Date
    Jul 2012
    Posts
    352
    Location
    West Granby CT
    Tractor
    JD 4105. 375 Backhoe. 2005 Polaris Ranger

    Default Re: any use for tree stumps?

    Always been a fan of Nakashima. I would have loved to have the chance to meet him. Very interesting person and life he led. Love his benches. A true craftsman. And yes, you have to be very wealthy to afford his work. Good for him.

  10. #10
    Gold Member BuzzardA91's Avatar
    Join Date
    Jul 2012
    Posts
    352
    Location
    West Granby CT
    Tractor
    JD 4105. 375 Backhoe. 2005 Polaris Ranger

    Default Re: any use for tree stumps?

    Sorry DAUGEN, not trying to hijack. My favorite use for stumps is dig a hole and push them in. Gives me a great excuse to use tractor and backhoe and gives me a bunch of dirt to play around with. Can also line them up and make a type of burm. Animals love it.

Page 1 of 2 12 LastLast

Similar Threads

  1. Ash tree stumps
    By fuseboxer in forum Attachments
    Replies: 10
    Last Post: 05-12-2011, 02:25 PM
  2. Pulling Tree Stumps Safely
    By DenisM in forum Owning/Operating
    Replies: 77
    Last Post: 12-25-2007, 04:55 AM
  3. Tree stumps and farming
    By Doc_Bob in forum Ag Tractors & Machinery
    Replies: 35
    Last Post: 11-12-2006, 08:48 PM
  4. Help -Has anyone just burned tree stumps - BX23
    By Tractor_Jim_CT in forum Kubota Owning/Operating
    Replies: 23
    Last Post: 11-22-2004, 04:50 PM
  5. How do you excavate/remove tree stumps??
    By Laminarman in forum Projects
    Replies: 31
    Last Post: 06-17-2004, 03:29 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.