Results 1 to 4 of 4
  1. #1
    Silver Member
    Join Date
    Nov 2006
    Posts
    119
    Location
    Washington, Pa.
    Tractor
    McCormick CT36HST w/FEL, Kubota G2160

    Default rear remote detent kit from LS ?

    I'm thinking about changing one of the rear remotes to a detent type ( to run a log splitter for example ) This would be on an R3039H. I know I can strap the handle open, but I would rather have the detent kit if the cost is not through the roof. I think LS offers this as a kit ? Does anyone have any experience with this kit ?

    I would appreciate any comments about the install proceedure or costs involved.
    McCormick CT36HST w/FEL,
    FEL Stump Bucket,
    6 ft BB, hyd top link,
    Wallenstein GX720 BH,
    Land Pride PR2572 Powered Rake,
    15 KW PTO Generator,
    Pat's Easy Change,
    Ground Works Debris Rake 2.
    Kubota G2160 w/60 inch deck.

  2. #2
    Elite Member
    Join Date
    Jun 2011
    Posts
    3,007
    Location
    Sunny SW Washington
    Tractor
    LS R4010 & Cub Cadet 7300

    Default Re: rear remote detent kit from LS ?

    I don't know too much about hydraulics, so I just fitted one of my remotes with a linkage and use that cut off hammer handle below my chain box. Probably just a little bit redneck, eh?

    The Corporate Empire is NOT a Constitutional Republic...
    ...but it plays one on TV.

  3. #3
    Gold Member LittleBlueTractor's Avatar
    Join Date
    Dec 2009
    Posts
    435
    Location
    Houston
    Tractor
    LS S3010

    Default Re: rear remote detent kit from LS ?

    Quote Originally Posted by Short Game View Post
    I don't know too much about hydraulics, so I just fitted one of my remotes with a linkage and use that cut off hammer handle below my chain box. Probably just a little bit redneck, eh?
    No more redneck than that little trailer. Thanks for the idea!
    Lil' Blue
    ------------------
    LS Tractor S3010 w/FEL
    Ag-Meier Mohawk Brave 5' cutter
    Armstrong Ag BB05-Std 5' Box Blade
    TSC CountyLine Middle Buster
    WildKat 48" Single Cyl Grapple
    Versatech 42" Pallet Forks
    A "no name" Stump Bucket that works really well

  4. #4
    Elite Member
    Join Date
    Jun 2011
    Posts
    3,007
    Location
    Sunny SW Washington
    Tractor
    LS R4010 & Cub Cadet 7300

    Default Re: rear remote detent kit from LS ?

    Quote Originally Posted by LittleBlueTractor View Post
    Thanks for the idea!
    I don't know how the 3010s are, but there was a slight opening between the fender and the ROPS on my 4010. I split a short piece of 1/2" conduit that slipped over the remote lever snugly. I brazed a nut into the top end of that and put a bolt through a ball end linkage end that is threaded into a long thin piece of tubing I just found somewhere in my junk.

    Finding the route for my remote link wasn't easy. I looked at all kinds of possible ways to do it and wound up with that setup.
    The Corporate Empire is NOT a Constitutional Republic...
    ...but it plays one on TV.

Similar Threads

  1. Kioti's Rear Remote Kit.
    By kattywumpus in forum Kioti Owning/Operating
    Replies: 36
    Last Post: 06-21-2016, 02:46 PM
  2. Rear Remote Confusion...
    By KHNewman in forum Hydraulics
    Replies: 12
    Last Post: 11-07-2008, 01:26 AM
  3. L3400 rear remote
    By Stackwood in forum Kubota Owning/Operating
    Replies: 1
    Last Post: 01-17-2007, 12:31 PM
  4. Rear Remote Hyd kit for D40
    By klm in forum Case-IH
    Replies: 3
    Last Post: 12-28-2006, 10:21 PM
  5. Rear Remote
    By Spencer in forum Attachments
    Replies: 15
    Last Post: 01-29-2002, 11:04 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2016 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.