Results 1 to 10 of 13
-
02-27-2013, 07:13 PM #1
Any CAB options for R4041 ?
I searched thru Google and the forum, so if this was already addressed, my apologies for the redundancy.
Anyhow... have any of you found or added a cab to your R4041 or 4047? I'd love to see some pics and prices. I might even try to make my own at some point, if i can inspect one close up.
Thanks in advance.Massey 1652 HSTC - TEREX PT70 CTL - Ford 550 Industrial TLB
Hustler Z Diesel 66" ZTR - JD Gator 620i
Stump Bucket * 60" Tine Bucket * 60" HD Grapple * 68" 4-in-1 Bucket * 72" GP Bucket * 72" Rock Bucket
90" Hi-Cap Bucket * QA Forks * QA Tree-Puller * 96" HD BackBlade * 84" Dual-Grader * 84" BoxBlade * 84" Rake
78" Disc * 72" LP Seeder * 3pt StumpGrinder * 3pt Chipper * 96" Ford Flail * ATI Pre-Seeder 805
-
02-27-2013, 07:43 PM #2
- Join Date
- Sep 2010
- Posts
- 490
- Location
- Western, NY
- Tractor
- Bolens (Iseki) H1502; LS R3039
Re: Any CAB options for R4041 ?
You might dig up the recent thread here about the 'XR' series. Its the new 'factory cab' setup. The pictures may give you some ideas of a starting point.
-
02-27-2013, 09:29 PM #3
- Join Date
- Jan 2011
- Posts
- 205
- Location
- Steeler Country
- Tractor
- 2011 LS R4041EZ - 2014 Bad Boy CZT Elite - 1948 Ford 8N
Go to the New Holland site and look under the options page for the Boomer40/50. They have 2 aftermarket cab manufacturers listed. There's also a bunch of other accessories that NH offers that LS doesn't.
2011 LS R4041EZ - 1948 Ford 8N - 2014 Bad Boy CZT Elite
-
02-27-2013, 09:37 PM #4
-
02-27-2013, 10:24 PM #5
- Join Date
- Jan 2011
- Posts
- 205
- Location
- Steeler Country
- Tractor
- 2011 LS R4041EZ - 2014 Bad Boy CZT Elite - 1948 Ford 8N
http://www.dms.myflorida.com/content...1_06-15-12.pdf
Scroll through to find boomer 402011 LS R4041EZ - 1948 Ford 8N - 2014 Bad Boy CZT Elite
-
02-27-2013, 11:03 PM #6
I was thinking that, but I didn't want to assume it would b a direct fit. Has anyone confirmed that the NH cabs will bolt-match the LS twin?
Sent from my Motorola Photon using TractorByNet for AndroidMassey 1652 HSTC - TEREX PT70 CTL - Ford 550 Industrial TLB
Hustler Z Diesel 66" ZTR - JD Gator 620i
Stump Bucket * 60" Tine Bucket * 60" HD Grapple * 68" 4-in-1 Bucket * 72" GP Bucket * 72" Rock Bucket
90" Hi-Cap Bucket * QA Forks * QA Tree-Puller * 96" HD BackBlade * 84" Dual-Grader * 84" BoxBlade * 84" Rake
78" Disc * 72" LP Seeder * 3pt StumpGrinder * 3pt Chipper * 96" Ford Flail * ATI Pre-Seeder 805
-
02-28-2013, 07:55 AM #7
- Join Date
- Apr 2011
- Posts
- 1,174
- Location
- Erie Pa.
- Tractor
- Montana R4944, Ford Jubilee, Ford 621, Ford 841
Re: Any CAB options for R4041 ?
Here try this
Leading Solutions Cabs and Enclosures - Sims Cab Depot
They list the R4010 which I think is the version before the R4041. But after you add everything you want these are not cheep.
edit yea if you click on the center one your model is listed.Montana R4944
Ford Jubliee, Ford 841, Ford 621 industrial with FEL & BH
-
02-28-2013, 09:14 AM #8
- Join Date
- Jun 2008
- Posts
- 10,899
- Location
- Bismarck Arkansas
- Tractor
- 2009 Kubota RTV 900, 2009 Kubota B26 TLB & 2010 model LS P7010
Re: Any CAB options for R4041 ?
That makes the factory option of cab with HVAC & stereo for $5000 seem like a good buy. With that SIMS cab, you still have to install it and I didn't notice if it came with accessories to provide heat and air conditioning or if it is just the frame and glass.
2010 LS P-7010C 20F/20R gear tractor & FEL, 2009 Kubota B 26 TLB, RTV 900 Kubota,17 foot Lund boat with 70HP motor, 2012-20 ft 12k GVW trailer, 2011- 52" Craftsman ZTR mower, 2013 Ferris Zero Turn, 3 weed whackers, pressure washer, leaf blowers, 7 foot bush hog, 8 foot landscape rake , 8 foot 3 PH disc, 2 row cultivator, 350 amp Miller AC/DC welding machine and all the tools needed to keep them all repaired and running.
-
02-28-2013, 09:26 AM #9
- Join Date
- Jun 2008
- Posts
- 10,899
- Location
- Bismarck Arkansas
- Tractor
- 2009 Kubota RTV 900, 2009 Kubota B26 TLB & 2010 model LS P7010
Re: Any CAB options for R4041 ?
Went back to the site and took an indepth look. Cab price is just the cab for $5295. I added in the features that my Cab came with, like 4 work lights, AC and HEAT, dual mirrors, floor mats, windshield wiper, windshield washer & stereo came to additional $4242 and didn't account for the turn signals that weren't listed, rear windshield wiper with washer, interior dome lights and of course installation. So after market looks like one would be lucky to get it in working order for $10K as comparable to a factory cab option. Likely be cheaper to trade in you tractor on a new one with factory cab even taking into consideration loss due to depreciation. IIRC cab options when I bought my tractor for most different brands ran about $5,000 higher than non cab models.
2010 LS P-7010C 20F/20R gear tractor & FEL, 2009 Kubota B 26 TLB, RTV 900 Kubota,17 foot Lund boat with 70HP motor, 2012-20 ft 12k GVW trailer, 2011- 52" Craftsman ZTR mower, 2013 Ferris Zero Turn, 3 weed whackers, pressure washer, leaf blowers, 7 foot bush hog, 8 foot landscape rake , 8 foot 3 PH disc, 2 row cultivator, 350 amp Miller AC/DC welding machine and all the tools needed to keep them all repaired and running.
-
03-01-2013, 08:34 AM #10
Yeah, I'm not in any particular hurry to add 1 right now... Just wanted to see what options I would have in case I wanted to add 1 later. Looks like I'd be better off making 1 on my own.
Sent from my Motorola Photon using TractorByNet for AndroidMassey 1652 HSTC - TEREX PT70 CTL - Ford 550 Industrial TLB
Hustler Z Diesel 66" ZTR - JD Gator 620i
Stump Bucket * 60" Tine Bucket * 60" HD Grapple * 68" 4-in-1 Bucket * 72" GP Bucket * 72" Rock Bucket
90" Hi-Cap Bucket * QA Forks * QA Tree-Puller * 96" HD BackBlade * 84" Dual-Grader * 84" BoxBlade * 84" Rake
78" Disc * 72" LP Seeder * 3pt StumpGrinder * 3pt Chipper * 96" Ford Flail * ATI Pre-Seeder 805
Similar Threads
-
JD 955 Cab options?
By jd955sb in forum John Deere Owning/OperatingReplies: 20Last Post: 03-08-2018, 12:29 PM -
Cab Heating Options
By massey184ferguson in forum CustomizationReplies: 15Last Post: 02-11-2013, 07:02 PM -
Options for a 2520 cab
By Bswope in forum John Deere Buying/PricingReplies: 14Last Post: 02-22-2010, 01:02 PM -
3520 options, Cab or no?
By Brahmus in forum John Deere Buying/PricingReplies: 27Last Post: 08-13-2008, 07:25 AM -
utv cab options
By MrChris in forum ATVs & Utility VehiclesReplies: 2Last Post: 10-17-2007, 11:13 PM