Results 11 to 20 of 67
-
03-04-2011, 09:00 PM #11
re: LS Tractor Oil, Gas, & Air Filter Information
Summertime, Chasing the Wind
LS 3010 FEL, 6.6' snowblade, rear tires loaded
-
03-04-2011, 09:27 PM #12
re: LS Tractor Oil, Gas, & Air Filter Information
These are the filters I run on my atv and motorcycle, pureone purolators, I use the longer one of these two as I have room for them PL 14610 or PL14612 don't remember which one right now, cross referenced I think they are the same as the ML16817 but the ML version is made in China, I think I have two of them given to me by a friend that he used on his Goldwing.
Summertime, Chasing the Wind
LS 3010 FEL, 6.6' snowblade, rear tires loaded
-
04-16-2011, 08:59 AM #13Bronze Member
- Join Date
- Dec 2010
- Posts
- 67
- Location
- Central Alberta
- Tractor
- JD L120 looking @ LS i3040
re: LS Tractor Oil, Gas, & Air Filter Information
I see 31A40-02100 , found this Wix page:
http://c2c.activant.com/ctoc/index.j...RPVFY6AlUKUnkf
Which ironically lists the Mitsubishi number without a dash.
Either way if that is your filter it looks pretty standard. The Wix dimensions are all on that page too.Last edited by Putter; 04-16-2011 at 09:03 AM. Reason: Added link.
-
06-15-2011, 11:52 AM #14Elite Member
- Join Date
- Jun 2011
- Posts
- 2,973
- Location
- Sunny SW Washington
- Tractor
- LS R4010 & Cub Cadet 7300
re: LS Tractor Oil, Gas, & Air Filter Information
Coming up on 50 hours with my R4010.
Thanks for doing this thread, Rod. You do rock!
-
06-16-2011, 05:54 PM #15
re: LS Tractor Oil, Gas, & Air Filter Information
Yes, I just did my 50 hour on mine.
The fuel filter is the only part that took time.
Remember there are two drain plugs in the oil pan, right and left side (if you have a 4 wheel drive).LS Tractor R4010, Loader, 6ft Shredder, Box blade, Sun Shade, Pat's Easy Hitch, PTO Wood Chipper

-
06-17-2011, 01:20 AM #16Elite Member
- Join Date
- Jun 2011
- Posts
- 2,973
- Location
- Sunny SW Washington
- Tractor
- LS R4010 & Cub Cadet 7300
re: LS Tractor Oil, Gas, & Air Filter Information
I went to my LS dealer and to NAPA yesterday. I used the WIX numbers and the NAPA hydraulic filter was more expensive than the dealer's version. The dealer was out so I'm going to order one there.
The engine oil filter WIX number didn't compute at NAPA. I used the Fram number and that crossed to a NAPA Gold 1334 (same as my Honda Civic).
The only two filter elements to replace at 50 hours in my Op's Manual are engine oil and trans/hydraulic oil. It doesn't call for an engine oil change until 300 hours.
Originally Posted by rocknrod
I'm going for redundancy in fuel filters anyway by adding a super good filter to the line before the stocker. The Pacific Northwest is under water too much of the time. I pumped the injectors full of water on my old tractor once. I like having a see-through sediment bowl.
=========================
Geez, Rod, you got your R4010 on New Years Eve and just getting to 50 hours? I'm getting there in less than five weeks. I guess us submareeners are more productive than you skimmers.Last edited by Short Game; 06-17-2011 at 01:38 AM.
-
06-18-2011, 05:30 PM #17
-
07-09-2011, 09:52 AM #18Elite Member
- Join Date
- Jun 2011
- Posts
- 2,973
- Location
- Sunny SW Washington
- Tractor
- LS R4010 & Cub Cadet 7300
re: LS Tractor Oil, Gas, & Air Filter Information
Bump.
-
09-01-2011, 06:43 PM #19
re: LS Tractor Oil, Gas, & Air Filter Information
LS Tractor R4010, Loader, 6ft Shredder, Box blade, Sun Shade, Pat's Easy Hitch, PTO Wood Chipper

-
09-01-2011, 08:40 PM #20Silver Member
- Join Date
- Jan 2011
- Posts
- 118
- Location
- Steeler Country
- Tractor
- 2011 LS R4041EZ - 2011 Craftsman 6000 Tight Turn - 1948 Ford 8N
Rod... copy and paste me post and i get no love... just kidding. Any info or help I can give to fellow ls'ers is my pleasure.
2011 LS R4041EZ W/ FEL - 1948 Ford 8N - 2011 Craftsman 6000 Tight Turn
Similar Threads
-
K&N oil filter and air filter ???
By bx2670 in forum Oil, Fuel & LubricantsReplies: 12Last Post: 01-16-2012, 12:07 PM -
Oil & Fuel Hydraulic oil and filter change, no lift,air in oil
By dan1948 in forum YanmarReplies: 9Last Post: 07-18-2008, 09:04 PM -
Yanmar tractor parts-Air filter/Fuel filter
By Big Sky Blue in forum YanmarReplies: 7Last Post: 05-25-2008, 02:01 PM -
Cost of a gas filter or Air filter for my tractor.
By JohnBoy45 in forum Kubota Owning/OperatingReplies: 4Last Post: 08-14-2005, 07:08 PM -
Cost of a gas filter or Air filter for my tractor.
By JohnBoy45 in forum Oil, Fuel & LubricantsReplies: 0Last Post: 08-14-2005, 06:53 AM



Reply With Quote
