Results 1 to 4 of 4
  1. #1
    Platinum Member rwork's Avatar
    Join Date
    Apr 2012
    Posts
    524
    Location
    Mississippi Gulf Coast
    Tractor
    Kubota B6100 LS R3039H

    Default Hydraulic Filter Change

    I.changed my hydraulic and HST filters this morning. No problems getting them off, but I took the big filter off first, and lost about a gallon of fluid! Wasn't expecting that much to come out.

    Sent from my iPad using TractorByNet
    2012 LS R3039H, 6' Howse HD Box Blade, 4' Root Grapple, CID Stump Bucket
    1975 Kubota B6100, Craftsman Garden Tractor, eXMark Lazer Z mower.

  2. #2
    Super Member Gary Fowler's Avatar
    Join Date
    Jun 2008
    Posts
    6,521
    Location
    Bismarck Arkansas
    Tractor
    2009 Kubota RTV 900, 2009 Kubota B26 TLB & 2010 model LS P7010

    Default Re: Hydraulic Filter Change

    I did the same thing when removing my hydraulic filter. Of course it is about the size of a one gallon syrup bucket and since it slipped out of my hand and fell on its side it drained another half gallon out on the ground. Dirt floor in my parking shed makes an excellent oil sorb though. I have a mixture of dirt and crushed shale which I think is actually oil bearing rock so a little more oil just helps keep down the dust.
    2010 LS P-7010C 20F/20R gear tractor & FEL, 2009 Kubota B 26 TLB, RTV 900 Kubota,17 foot Lund boat with 70HP motor, 2012-20 ft 12k GVW trailer, 2011- 52" Craftsman ZTR mower, 3 weed whackers, pressure washer, leaf blowers, 7 foot bush hog, 8 foot landscape rake , 8 foot 3 PH disc, 2 row cultivator, 350 amp CC AC/DC welding machine and all the tools needed to keep them all repaired and running.

  3. #3
    Member
    Join Date
    Jul 2011
    Posts
    35
    Location
    Albert County, NB Canada
    Tractor
    135 MF, 7010 LS, 510B John Deere Backhoe

    Default Re: Hydraulic Filter Change

    Gary, I went to change my hydraulic filter and seen there was going to be quite abit spill so I stopped. Reason being I had 32 hydraulic oil and the 7010 takes 68. As soon as I get the 68 weight oil I will change the filter. Quite a storm the other day. Out playing.

    Hydraulic Filter Change-wind-blowing.jpg

  4. #4
    Super Member Gary Fowler's Avatar
    Join Date
    Jun 2008
    Posts
    6,521
    Location
    Bismarck Arkansas
    Tractor
    2009 Kubota RTV 900, 2009 Kubota B26 TLB & 2010 model LS P7010

    Default Re: Hydraulic Filter Change

    The dealer told me to just use universal hydraulic oil. I told him I had some AW 32 that I used in my Yanmar and he said that any of it would work in our climate. It says it meets the JD-20C and kubota SUDT spec so I figured it would work in a gear drive. No problems so far but I only put in about a gallon. Not near 200 hours yet so I have time to research it prior to dumping the 15 or so gallons out. I think I will put that same oil in my Kubota when I change it out which wont be too much longer. I changed hydraulic filters on the HST transmission on the Kubota and it opens the reservoir to drain and even as quick as I could screw on the new one, I lost about 2 gallons so I put back the SUDT for it this time. At least with the LS, you only loose what is in the filter and a little in the line, but it will continue to leak a bit until you get the new one on. I had a disc or bushhog or box blade (cant remember which) but had something on the 3 PH so I was sliding around under the tractor. Best to take anything off the back and make it easier to get to. Have big container slide under the syrup bucket filter and as soon as it is off pop the other one on and you wont loose much oil at all, just basically what the filter holds.
    2010 LS P-7010C 20F/20R gear tractor & FEL, 2009 Kubota B 26 TLB, RTV 900 Kubota,17 foot Lund boat with 70HP motor, 2012-20 ft 12k GVW trailer, 2011- 52" Craftsman ZTR mower, 3 weed whackers, pressure washer, leaf blowers, 7 foot bush hog, 8 foot landscape rake , 8 foot 3 PH disc, 2 row cultivator, 350 amp CC AC/DC welding machine and all the tools needed to keep them all repaired and running.

Similar Threads

  1. Replies: 3
    Last Post: 04-10-2012, 08:30 AM
  2. Hydraulic Filter change
    By gcampo in forum TYM Owning/Operating
    Replies: 5
    Last Post: 10-23-2011, 06:14 PM
  3. Hydraulic filter change
    By NWOH_Grizz in forum New Holland Owning/Operating
    Replies: 13
    Last Post: 03-27-2011, 09:52 AM
  4. about to change hydraulic filter . . . what's in my bx?
    By shrekbelly in forum Kubota Owning/Operating
    Replies: 13
    Last Post: 07-12-2010, 06:11 PM
  5. Hydraulic filter Change
    By bbse in forum Kioti Owning/Operating
    Replies: 9
    Last Post: 05-05-2006, 10:28 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.