Results 1 to 1 of 1
10-26-2012, 06:00 AM #1
- Join Date
- Aug 2012
- BRESILLEY (FRANCE)
- LS RIO36 HST + David Brown 880 Selectmatic
HST Pedal issue (sound familiar ?)
The tractor is doing rather fine (or rather was....) I did the 50 hours service yesterday, the French importer (honestly a douchbag...) for LS specifies that the transmission oil must be changed as well as the filters, seemed like a waste but I went along with it, I used the old oil for a very old David Brown 880 Selectmatic tractor that had been running "mayonnaise" in its internals .
I do have a issue I was hopping the oil change would solve nut it hasn't , the bloody HST pedal has started being lazy (1 to 2 second lag) when coming back to the center position, it started around 45 hours and hasn't improved a bit with the maintenance.
It only does this when running the engine with a range selected (ie moving) if I play with the pedals in neutral it works just fine....
Now I'm going to try to see if I can fix it by cleaning and lubricating the linkage (the V notch thing included) but in case this isn't the solution has anybody else ever had the issue ?
Cheers from europe
By msgtblack in forum Kubota Owning/OperatingReplies: 2Last Post: 03-11-2012, 09:30 AM
By ptrotter in forum Kubota Owning/OperatingReplies: 6Last Post: 07-09-2009, 04:26 PM
By Charliebrn in forum Kubota Owning/OperatingReplies: 3Last Post: 05-30-2006, 06:39 PM
By oldgoat2 in forum Kubota Owning/OperatingReplies: 17Last Post: 11-25-2005, 11:48 AM
By georgi in forum Case-IHReplies: 2Last Post: 01-26-2005, 12:26 PM