Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 31
  1. #11
    Elite Member
    Join Date
    Sep 2002
    Posts
    3,175
    Location
    Red Bluff, CA
    Tractor
    Changes often!

    Default Re: Mahindra 3016 vs 3616

    Dealers set their own prices, but I'd think you can get a 3616 for about $2500 more than the 3016 if both are spec'd with the same loader and the same transmission type. Many dealer spec the 3016 with the pin-on bucket ML115 and the 3616 with the skid-steer ML115skc, and that adds about $500 at MSRP if I recall correctly. So in that instance, a $3k spread is about normal.

    The 36 has 8 HP more and runs a little larger tire. Lift is the same, weight is about the same. So it comes down to if you need more HP to run a larger mower or something.
    Dave
    Dave's Tractor, Inc.
    Red Bluff, California

  2. #12

    Default Re: Mahindra 3016 vs 3616

    Thanks everyone for the info back.

  3. #13
    New Member
    Join Date
    Apr 2012
    Posts
    9
    Location
    Lawrenceburg, Ky
    Tractor
    None yet

    Default Re: Mahindra 3016 vs 3616

    Just as an FYI on this. I got my first "real" quote on the 3616 the other day. I've decided to go with that one.

    I did no haggling at all ... just a straight quote from the dealer and it was $2,245 higher than what I had as my estimate on page 1.

    I think with a bit of haggling I could get it quite close to this #. There was about $1,000 that was on implements that were higher than I could go to Tractor Supply and pick them up for.

    I'll post up again here soon. I hope to today talk to a different dealer that I actually want to buy from.. so hopefully by the end of the day I'll a good firm haggled over quote from him.

    Thanks,

    Brian

  4. #14

    Default Re: Mahindra 3016 vs 3616

    Thank you for the update. I will be interested in where you end up. I am planning on getting quotes toward the end of next week and any info you post will be much appreciated.

  5. #15
    Member
    Join Date
    Aug 2011
    Posts
    31
    Location
    Eastern Washington State
    Tractor
    Mahindra 2816

    Default

    I could not justify the extra expense for a few more HP.

    My dealer told me also the 3616 uses a more fuel also as if has a turbo but does not bog as easy.
    Mahindra 2816 w/ 5' Rotary Cutter & Straight blade

  6. #16
    Elite Member
    Join Date
    Sep 2002
    Posts
    3,175
    Location
    Red Bluff, CA
    Tractor
    Changes often!

    Default Re: Mahindra 3016 vs 3616

    Quote Originally Posted by MrWinkey View Post
    I could not justify the extra expense for a few more HP.

    My dealer told me also the 3616 uses a more fuel also as if has a turbo but does not bog as easy.
    The 3616 is not turbocharged.
    Dave
    Dave's Tractor, Inc.
    Red Bluff, California

  7. #17
    Member
    Join Date
    Aug 2011
    Posts
    31
    Location
    Eastern Washington State
    Tractor
    Mahindra 2816

    Default

    Apologies.....I thought that was the diff between the 2 models.

    I dont feel bad now for having 6 less hp.
    Mahindra 2816 w/ 5' Rotary Cutter & Straight blade

  8. #18
    Elite Member
    Join Date
    Sep 2002
    Posts
    3,175
    Location
    Red Bluff, CA
    Tractor
    Changes often!

    Default Re: Mahindra 3016 vs 3616

    Quote Originally Posted by MrWinkey View Post
    Apologies.....I thought that was the diff between the 2 models.

    I dont feel bad now for having 6 less hp.
    Don't mean to be fussy, but it is 8 HP difference. Basically the 3616 has a larger engine and a larger set of tires if you go with the R4 tires, and the exact same tires if you go with R1. I think for most people, the 3016 is more than adequate. We sell 3016 vs 3616 about 5:1. Where I'd prefer the 3616 is in running a large mower or tiller where you just have to have more PTO HP.
    Dave
    Dave's Tractor, Inc.
    Red Bluff, California

  9. #19
    New Member
    Join Date
    Apr 2012
    Posts
    9
    Location
    Lawrenceburg, Ky
    Tractor
    None yet

    Default Re: Mahindra 3016 vs 3616

    Ok ... so I went to the dealer yesterday and did some haggling. Got the price down some .. but not to my goal. Low enough that I took the package. Waiting on financing to be oked at this point.

    Here is what I got:

    3616 Shuttle 4wd (no cab) FEL with filled Ag tires = $18,695
    5' Bush Hog (with slip clutch) = $895
    55 Gallon Boom Sprayer with Aluminum Gun = $895
    5' Tiller (with slip clutch and 5 tines per) = $1550
    3 Point harness seed/fertilizer spreader = $450
    2 Hooks welded on bucket (one in line with each arm) = Free


    So a total of $22,485 for the package.

    I decided to drop the finish mower as I need the sprayer more than the finish mower.

    Hopefully financing goes through and I'm supposed to be able to get it this weekend!

  10. #20
    New Member
    Join Date
    Apr 2012
    Posts
    9
    Location
    Lawrenceburg, Ky
    Tractor
    None yet

    Default Re: Mahindra 3016 vs 3616

    Just got word that financing was approved!

    So happy... should take delivery this weekend.

    Thanks,

    Brian

Page 2 of 4 FirstFirst 1234 LastLast

Similar Threads

  1. Buying Advice kobota bx25 vs mahindra max 25
    By Quadrivium in forum Mahindra Buying/Pricing
    Replies: 399
    Last Post: 10-07-2014, 07:49 PM
  2. Mahindra 3616 Input needed
    By rox5488 in forum Mahindra Buying/Pricing
    Replies: 3
    Last Post: 09-18-2011, 08:33 PM
  3. Buying Advice Yanmar or Mahindra? Small vs Large? - HELP!!
    By chnash99 in forum Yanmar
    Replies: 21
    Last Post: 08-16-2011, 11:43 AM
  4. LS vs. Mahindra
    By timebak in forum LS Tractors
    Replies: 62
    Last Post: 03-02-2011, 03:30 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.