Page 2 of 7 FirstFirst 12345 ... LastLast
Results 11 to 20 of 63
  1. #11
    Gold Member
    Join Date
    May 2012
    Posts
    486
    Location
    NW Louisiana
    Tractor
    MF 35, Mahindra 4035

    Default Re: Inked on a 4035 today !

    Like the ability to open/close while raising/lowering... Simply my opinion but I think that could come in handy, don't ask when or where 'cause I don't have that answer...far as the company, it's on my computer @ work so I'll get it tomorrow...I like a factory look so I searched around for that with regards to th joystick...the 4035 PST came with one remote and I ordered the kit for a second, n yep my math was off, save about 4 bills installing myself...the second pair of rear remotes will probably wait till after deer season, gotta have some priorities !! Lololol ! And yes I will be ordering top and tilt very soon...

    Rich

  2. #12
    Gold Member gumshu's Avatar
    Join Date
    Jun 2009
    Posts
    469
    Location
    Atascadero, Ca. & Selma, Or.
    Tractor
    Kubota M7040, Bobcat CT235, Kubota BX23 TLB & RTV 900

    Default Re: Inked on a 4035 today !

    Quote Originally Posted by Biggreenavalanche View Post
    Found a company that supplys a kit which includes all hoses, valves, electric connects, and a factory match joy stick with the 3 function switch/button built in...about $700 for all in kit with dummy instructions which I def need !!!
    W.R. Long has a kit and so does Construction Attachments. W.R. Long has more though.
    F350 6.4 Dually, PJ 14K 20', PJ 3.5K

  3. #13
    Silver Member wirenut's Avatar
    Join Date
    Mar 2011
    Posts
    132
    Location
    Summit, MS
    Tractor
    Mahindra 5035, MF250, New Holland LS190, JD Gator 6x4

    Default Re: Inked on a 4035 today !

    Quote Originally Posted by Biggreenavalanche View Post
    Found a company that supplys a kit which includes all hoses, valves, electric connects, and a factory match joy stick with the 3 function switch/button built in...about $700 for all in kit with dummy instructions which I def need !!!
    If you don't mind me asking, what company did you find? I would like to install one on my 5035 one day.
    Good choice with the 4035, but I might be biased.
    thanks
    Mahindra 5035 PST, MF 250, Jinma LW-8 BH, Kubota 72" ZD331, NH LS190 SS, JD 6x4 Diesel Gator, SS backhoe attachment, Markham grapple, Markham stump bucket, Markham tooth bucket (awesome), 6" Jinma chipper, 72" King Kutter tiller, 72" box blade, 72" rotary cutter, 72" landscape rake, homemade hydraulic post hole digger, homemade 16' boom, homemade pallet forks

  4. #14
    Gold Member
    Join Date
    May 2012
    Posts
    486
    Location
    NW Louisiana
    Tractor
    MF 35, Mahindra 4035

    Default Re: Inked on a 4035 today !

    It may be w r long...CA didn't have a set up for mahindra, I called them in reference to their compact root grapple, I buying their 60" model, however they did not have a third function set up for mahindra

  5. #15
    Super Star Member
    Join Date
    Jul 2011
    Posts
    14,436
    Location
    Yanceyville, North Carolina
    Tractor
    Kubota L4400

    Default Re: Inked on a 4035 today !

    Congratulations. Best wishes.
    The PUPIL who does not surpass his Master, fails his Master.

  6. #16
    Gold Member
    Join Date
    May 2012
    Posts
    486
    Location
    NW Louisiana
    Tractor
    MF 35, Mahindra 4035

    Default Re: Inked on a 4035 today !

    Thanks to all...BTW, pick up will be tomorrow at 9:00 AM...

  7. #17
    Veteran Member JerryK's Avatar
    Join Date
    Feb 2004
    Posts
    1,424
    Location
    Vanderbilt, Michigan, USeh?
    Tractor
    Mahindra 5035, JD 2240, 420

    Default Re: Inked on a 4035 today !

    [ Note to self... charge up my camera batteries. So I can take pictures and post them tomorrow after I get her home ... and impress all the TractorByNet folks..... ]
    48" CID QA forks, 6' EverythingAttachments Land Plane, 78" JRW rear blower, homemade 1 ton rear weight, 6' Ford rear blade, homemade boom, big homemade 3pt box/carrier, 8" wood chipper

  8. #18
    Gold Member
    Join Date
    May 2012
    Posts
    486
    Location
    NW Louisiana
    Tractor
    MF 35, Mahindra 4035

    Default Re: Inked on a 4035 today !

    JerryK, Camera, check, batteries, check !

    Brian, it was W.R. Long that makes the 3rd function kit...hoses, brackets, elect/hyd valve and replacment joystick cover....the price the regional rep told me was $710.00...if you get a chance check into them, I'd like to know your thoughts...

    Construction Attachments make the same set up in a kit, just don't have one for Mahindra, Called W.R. Long this a.m. and confirmed they have one for the 4035/ML120.

    Rich

  9. #19
    Gold Member
    Join Date
    May 2012
    Posts
    486
    Location
    NW Louisiana
    Tractor
    MF 35, Mahindra 4035

    Default Re: Inked on a 4035 today !

    Picked it up this morning...can't wait to get off work so I can go home and play ! Came with a full tank and 3.5 hours on it...been reading the owner manual and the manual for the loader...cannot seem to find a layout showing all the lube points, any ideas ? Gotta do some work then I'll get back in the manual...Man, this thing is stout and is a WORLD of difference from my old MF 35 !! One thing I liked immediately, I drove up to the rear of my trailer, lowered the loader to raise the front wheels, and drove up on the trailer without having to fool with the ramps !!!! Dealer actually recommended it and said it wouldn't hurt a thing !! For a lazy boy like me that was great !! I'll figure out how to post a pic or two shortly, and will also give a review after I've put some hours on it...so far I absoulutely love it !!

    Rich

  10. #20
    Veteran Member wedge40's Avatar
    Join Date
    Oct 2007
    Posts
    2,209

    Default Re: Inked on a 4035 today !

    Quote Originally Posted by Biggreenavalanche View Post
    Picked it up this morning...can't wait to get off work so I can go home and play ! Came with a full tank and 3.5 hours on it...been reading the owner manual and the manual for the loader...cannot seem to find a layout showing all the lube points, any ideas ? Gotta do some work then I'll get back in the manual...Man, this thing is stout and is a WORLD of difference from my old MF 35 !! One thing I liked immediately, I drove up to the rear of my trailer, lowered the loader to raise the front wheels, and drove up on the trailer without having to fool with the ramps !!!! Dealer actually recommended it and said it wouldn't hurt a thing !! For a lazy boy like me that was great !! I'll figure out how to post a pic or two shortly, and will also give a review after I've put some hours on it...so far I absoulutely love it !!

    Rich
    Since you have so few posts, I'll point out that nothing on here is real till we see photos..
    Congrats on the new tractor.
    1967 Ford 4000,Mahindra 4530 with FEL and BH, Box blade, straight blade, FEL, Rake, Bushhog, Backhoe, Jinma chipper, KKII tiller, Grapple. Mahindra 4530, with FEL and Backhoe.

Page 2 of 7 FirstFirst 12345 ... LastLast

Similar Threads

  1. Inked a new 3032e today !!!
    By Cntryboy0075 in forum John Deere Buying/Pricing
    Replies: 14
    Last Post: 05-31-2012, 08:48 AM
  2. 4035 Pic
    By Chris 3055 in forum Mahindra Owning/Operating
    Replies: 32
    Last Post: 05-13-2012, 11:00 AM
  3. Chains 4035
    By hydro2 in forum Mahindra Owning/Operating
    Replies: 0
    Last Post: 01-25-2012, 12:15 PM
  4. breaking in 4035
    By snowtime in forum Owning/Operating
    Replies: 4
    Last Post: 08-27-2011, 10:44 AM
  5. 4035 backhoe
    By jwcinpk in forum Mahindra Owning/Operating
    Replies: 6
    Last Post: 02-21-2011, 08:44 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.