Purchased new in 2007 and had several problems ever since. Several items never worked, even after sending back to the dealer. Headlights and horn blow a fuse immediately after turning on, washer fluid pump worked for about a week, have to remove base plate and tap on the solenoid valve to engage PTO, AC unit worked for about 3 months, and the fuel gauge never worked. Due to no fuel gauge, of course I ran out of fuel and have spent 2 days attempting to bleed system. Manual is totally inaccurate how to do this and the hand pump is almost impossible to reach due to having a front end loader. Very apparent that the tractor and front end loader were designed seperately without any cooperation between engineering groups. Just to the left of the injector pump is a removable cap painted yellow. Anyone know what this is for? Dealer mechanic clueless on how to bleed system and no idea what the yellow cap accesses. Anyone out there know how to bleed system? The screws on the filters are not bleed screws as the book says but the actual bolts holding the filters on. Loosened the banjo nut on the pump as well as the injector lines directly into the engine. Got good flow, still will not start. About ready to sell and put a few bucks in my 1967 JD 4020. Not sure the Mahindra will be working 10 years from now, but I know the JD will.