BillyCrash
Member
So could the battery be bad, even if the charger says it's fully charged?
Not knowing how much you have worked on stuff, it is hard to recommend something. But if it were me [ disclaimer here ], I'd turn the key to on... then jumper from the big 12v postive lead on the starter to the little solenoid terminal... and see if she would turn over and/or start that way. That bypasses all the little wiring and switches [ ie:safety switches ].. But you have to be smart enough to make sure the tractor is in neutral, etc... If that does not do anything.. then you probably have a loose or bad big cable going to the battery [ don't forget the ground cable on the frame ], bad solenoid or starter, or could even be an open inside the battery itself. Like the above post, voltmeter is really what you need... Good luck, Jerry....