bulldog9
Member
Considering a move from blue tractors to red ones and will have an opportunity this weekend to compare a 5035 PST side-by-side to my TC 55DA New Holland ("Tractor Olympics" scheduled for this weekend!). I plan on hooking up a 4 bottom plow to both units (already know the NH can pull it through clay) and realize I would be giving up a few hp, but the Mahindra looks to be a much heavier, sturdier tractor. A few questions to anyone out there who is more familiar with the Mahindra tractor than I am:
1. Will the 5035 turn an 84" rotary cutter through moderate to thick brush (up to 2.5" thick). Run a 72" w/ my NH at present with no problem
2. Service intervals on fluids?
3. Any idea of the torque rating of this motor? Can't find it anywhere on the net.
4. Anything else I should know?
Thank you for your assistance
1. Will the 5035 turn an 84" rotary cutter through moderate to thick brush (up to 2.5" thick). Run a 72" w/ my NH at present with no problem
2. Service intervals on fluids?
3. Any idea of the torque rating of this motor? Can't find it anywhere on the net.
4. Anything else I should know?
Thank you for your assistance