Page 1 of 2 12 LastLast
Results 1 to 10 of 19
  1. #1
    New Member bulldog9's Avatar
    Join Date
    Jan 2005
    Posts
    23
    Location
    Upstate NY
    Tractor
    New Holland TC24DA/ Mahindra 5035 PST

    Default 5035 Questions

    Considering a move from blue tractors to red ones and will have an opportunity this weekend to compare a 5035 PST side-by-side to my TC 55DA New Holland ("Tractor Olympics" scheduled for this weekend!). I plan on hooking up a 4 bottom plow to both units (already know the NH can pull it through clay) and realize I would be giving up a few hp, but the Mahindra looks to be a much heavier, sturdier tractor. A few questions to anyone out there who is more familiar with the Mahindra tractor than I am:

    1. Will the 5035 turn an 84" rotary cutter through moderate to thick brush (up to 2.5" thick). Run a 72" w/ my NH at present with no problem

    2. Service intervals on fluids?

    3. Any idea of the torque rating of this motor? Can't find it anywhere on the net.

    4. Anything else I should know?

    Thank you for your assistance

  2. #2
    Gold Member idaho2's Avatar
    Join Date
    Aug 2009
    Posts
    350
    Location
    SW WA / North Idaho
    Tractor
    Mahindra 5530 4WD Turbo - Gear,

    Default Re: 5035 Questions

    Bulldog9,

    Go to the Mahindra header on the top of this page if its there, or go to Mahindrausa.com and get the specs from that site. Looking to see your followup on this coming weekend.

    idaho2

  3. #3
    New Member bulldog9's Avatar
    Join Date
    Jan 2005
    Posts
    23
    Location
    Upstate NY
    Tractor
    New Holland TC24DA/ Mahindra 5035 PST

    Default Re: 5035 Questions

    Thanks idaho2

    Did check their website and could not find answers to those questions (then again, I can't find the ketchup in the fridge when it is right in front of me either). Anyone?

  4. #4
    Veteran Member AchingBack's Avatar
    Join Date
    Jun 2005
    Posts
    2,052
    Location
    Southern Oregon
    Tractor
    Mahindra 2615HST

    Default Re: 5035 Questions

    Bull Dog, I can't answer all of your questions; I do know, according to the specifications for the 5035 PST, the hp at the PTO is 43. What is the horse power requirement on your rotary cutter? Your tractor is rated at 46 hp, not a lot of difference there. As to the plowing, the Mahindra is about 700 lbs. heavier than the NH. The NH has a few more horses, but the Mahindra should offer superior traction. Let us know the results of your comparison test.

    Also, consider the 5 year warranty, and the buyer exchange program.
    I thank God for these gifts: 2005 Mahindra 2615 HST w/loader, (485 hours), and 3710 backhoe. Markham tooth bar, Bush Hog SQ60 rotary cutter, Bush Hog 3507 angle blade, Bush Hog LLR84 landscape rake w/gauge wheels, Rankin loader mounted forks, Paumco Quick Spade, Agri-Ease 3 point log splitter.

  5. #5
    Silver Member wirenut's Avatar
    Join Date
    Mar 2011
    Posts
    131
    Location
    Summit, MS
    Tractor
    Mahindra 5035, MF250, New Holland LS190, JD Gator 6x4

    Default Re: 5035 Questions

    Interested in the outcome. Don't know why, I'm keeping my 5035.
    Mahindra 5035 PST, MF 250, Jinma LW-8 BH, Kubota 72" ZD331, NH LS190 SS, JD 6x4 Diesel Gator, SS backhoe attachment, Markham grapple, Markham stump bucket, Markham tooth bucket (awesome), 6" Jinma chipper, 72" King Kutter tiller, 72" box blade, 72" rotary cutter, 72" landscape rake, homemade hydraulic post hole digger, homemade 16' boom, homemade pallet forks

  6. #6
    New Member bulldog9's Avatar
    Join Date
    Jan 2005
    Posts
    23
    Location
    Upstate NY
    Tractor
    New Holland TC24DA/ Mahindra 5035 PST

    Default Re: 5035 Questions

    Familiar with the 5 year warranty, but what is the buyer exchange program?

    Thank you

  7. #7
    Veteran Member AchingBack's Avatar
    Join Date
    Jun 2005
    Posts
    2,052
    Location
    Southern Oregon
    Tractor
    Mahindra 2615HST

    Default Re: 5035 Questions

    Quote Originally Posted by bulldog9 View Post
    Familiar with the 5 year warranty, but what is the buyer exchange program?

    Thank you
    Bulldog, check with your local dealer on this program. I couldn't find it on the Mahindra USA website.
    I thank God for these gifts: 2005 Mahindra 2615 HST w/loader, (485 hours), and 3710 backhoe. Markham tooth bar, Bush Hog SQ60 rotary cutter, Bush Hog 3507 angle blade, Bush Hog LLR84 landscape rake w/gauge wheels, Rankin loader mounted forks, Paumco Quick Spade, Agri-Ease 3 point log splitter.

  8. #8
    New Member bulldog9's Avatar
    Join Date
    Jan 2005
    Posts
    23
    Location
    Upstate NY
    Tractor
    New Holland TC24DA/ Mahindra 5035 PST

    Default Re: 5035 Questions

    5035 was dropped off today for me to demo with a bent loader arm (left one) (?) Entire loader assembly is "cockeyed" and appears as if it is mounted about 6 inches off center. Same one I drove on the dealer lot last weekend (with no bent loader arm!). Puts a dent in my "tractor olympics" plan for the weekend. Looks like pulling events only.

  9. #9
    Veteran Member AchingBack's Avatar
    Join Date
    Jun 2005
    Posts
    2,052
    Location
    Southern Oregon
    Tractor
    Mahindra 2615HST

    Default Re: 5035 Questions

    Quote Originally Posted by bulldog9 View Post
    5035 was dropped off today for me to demo with a bent loader arm (left one) (?) Entire loader assembly is "cockeyed" and appears as if it is mounted about 6 inches off center. Same one I drove on the dealer lot last weekend (with no bent loader arm!). Puts a dent in my "tractor olympics" plan for the weekend. Looks like pulling events only.
    I hope the cockeyed loader problem was noted by the dealer, and signed off on an inspection sheet. Maybe you can use it to push over a crooked tree.
    I thank God for these gifts: 2005 Mahindra 2615 HST w/loader, (485 hours), and 3710 backhoe. Markham tooth bar, Bush Hog SQ60 rotary cutter, Bush Hog 3507 angle blade, Bush Hog LLR84 landscape rake w/gauge wheels, Rankin loader mounted forks, Paumco Quick Spade, Agri-Ease 3 point log splitter.

  10. #10
    New Member bulldog9's Avatar
    Join Date
    Jan 2005
    Posts
    23
    Location
    Upstate NY
    Tractor
    New Holland TC24DA/ Mahindra 5035 PST

    Default Re: 5035 Questions

    Quote Originally Posted by AchingBack View Post
    I hope the cockeyed loader problem was noted by the dealer, and signed off on an inspection sheet. Maybe you can use it to push over a crooked tree.
    Think it may be Mahindra's revolutionary new curved loader design that allows you to push material around a corner without ever turning the tractor. No worries with dealer - I have a long history with them and they are stand up guys.

Page 1 of 2 12 LastLast

Similar Threads

  1. Questions for 5035 Owners?
    By ssg510 in forum Mahindra Buying/Pricing
    Replies: 54
    Last Post: 04-22-2012, 11:29 PM
  2. My new 5035
    By Dougw133 in forum Mahindra Owning/Operating
    Replies: 28
    Last Post: 04-05-2012, 02:27 AM
  3. 5035 Questions....
    By JerryK in forum Mahindra Buying/Pricing
    Replies: 17
    Last Post: 04-10-2011, 07:21 PM
  4. Buying Advice 5035
    By the6shooter in forum Mahindra Buying/Pricing
    Replies: 37
    Last Post: 02-17-2011, 12:35 PM
  5. New 5035
    By Bascom in forum Mahindra Owning/Operating
    Replies: 9
    Last Post: 11-10-2010, 05:13 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.