Yea, what he said.:thumbsup:
Also, QA attachments are not uncommon.
I seriously doubt that there are many sources out there for pin on attachments intended for a Max.
One... and the one that counts....
Yea, what he said.:thumbsup:
Also, QA attachments are not uncommon.
I seriously doubt that there are many sources out there for pin on attachments intended for a Max.
Why don't you do a vid showing us how to take the backhoe on and off?
I did this saturday with my 28xl finally, no video really required. you back up to whereever you want to leave the hoe, drop the arms and the bucket to get it to unload the top pins, pop those clips and pull the pins, use the arms/bucket to lift the thing out of the cradle and ease the tractor forward a couple inches and shut it off. unhook the 3 hydraulic lines (I looped the two larger ones on the hoe, and plugged the third), loop the big ones on the tractor, and put the rubber sleeve on the other.
This photo is rarer than a picture of Sasquatch. I do believe people have been asking for information on removing/installing a Max28 backhoe for years (perhaps through the previous incarnation of the "Max" series), and this may be the first photo proof that the backhoe actually does exist and can be dismounted from the machine. You, sir, are to be commended.
Oh, wait, where's the Max28 in the picture? You're *sure* this isn't off of another machine? :laughing: