Page 5 of 6 FirstFirst ... 23456 LastLast
Results 41 to 50 of 55
  1. #41
    Member
    Join Date
    Mar 2013
    Posts
    47
    Location
    U.P. MICHIGAN
    Tractor
    mahindra 4035

    Default Re: 4035 spits and sputters at high rpms

    Finally on there way to get the tractor and get it fixed. Hopefully its a quick fix with the timing. Will post again when back up and running.

  2. #42
    Gold Member
    Join Date
    May 2012
    Posts
    486
    Location
    NW Louisiana
    Tractor
    MF 35, Mahindra 4035

    Default Re: 4035 spits and sputters at high rpms

    Well ? Hope she's running like a champ !

  3. #43
    Member
    Join Date
    Mar 2013
    Posts
    47
    Location
    U.P. MICHIGAN
    Tractor
    mahindra 4035

    Default Re: 4035 spits and sputters at high rpms

    They sure didn't have it long ! gone one day back the next. Not sure how its running yet because I am back to work, but come monday we will put it to the test. Will let all know then. I got my fingers crossed!!

  4. #44
    Member
    Join Date
    Mar 2013
    Posts
    47
    Location
    U.P. MICHIGAN
    Tractor
    mahindra 4035

    Default Re: 4035 spits and sputters at high rpms

    Well took it out for about an hour but still is not right. Under load while using the loader or going up a hill it started missing again and blowing white smoke, but not nearly as bad! Called the dealer and he told me that the pump could not be advanced anymore and he will have to contact Mahindra. Not sure why but that's the plan.

  5. #45
    Gold Member
    Join Date
    Jan 2012
    Posts
    341
    Location
    Winchester Ky
    Tractor
    Allis Chalmers ED 40

    Default Re: 4035 spits and sputters at high rpms

    Can you tell by looking at the pump flange/timng cover surface if they actually moved the pump? Is the pump's rotation actually blocked by the mounting studs being at the end of the slots? It's not my intent to demean your dealer, but I suspect they want to contact their service rep because they either don't know how to change the timing or are afraid to try. It may be that the pump slots won't allow any more rotation on the outside, but the the pump shaft can be rotated within the drive gear. Granted, it's not as simple as just loosening three nuts and rotating the pump, but any "factory trained, qualified thechnician" should be capable of the proceedure.

  6. #46
    Member
    Join Date
    Mar 2013
    Posts
    47
    Location
    U.P. MICHIGAN
    Tractor
    mahindra 4035

    Default Re: 4035 spits and sputters at high rpms

    They did rotate the pump and its as far as it will go in its slots. I noticed before they took it that it looked like it was almost to the end of the slots but couldn't be sure because of the washers being in the way. I will wait and see what they come up with. Its almost spring here and I sure could use a good running tractor!!

  7. #47
    Gold Member
    Join Date
    Jan 2012
    Posts
    341
    Location
    Winchester Ky
    Tractor
    Allis Chalmers ED 40

    Default Re: 4035 spits and sputters at high rpms

    You don't really have much choice, but whatever they decide on, stick to your guns that it had best not include another transport charge. I'm sure they will get this straightened out and the timing will be corrected. I believe someone at Mahindra will explain to them how to do it.

  8. #48
    Veteran Member JerryK's Avatar
    Join Date
    Feb 2004
    Posts
    1,352
    Location
    Vanderbilt, Michigan, USeh?
    Tractor
    Mahindra 5035, JD 2240, 420

    Default Re: 4035 spits and sputters at high rpms

    Could be that the Bosch injector pump went bad, or was never right in the first place. The KSB raises the injector pressure for 20 mins or so upon startup [when yours runs OK], and then the timer drops out lowering the internal injector pump back to normal. Maybe the pressure regulator inside the injector pump is too low, or there is some other loss of pressure happening inside the pump due to mechanical stuff. I'm sure they will get your tractor fixed soon, hang in there...
    48" CID QA forks, 6' EverythingAttachments Land Plane, 78" JRW rear blower, homemade 1 ton rear weight, homemade boom

  9. #49
    Member
    Join Date
    Mar 2013
    Posts
    47
    Location
    U.P. MICHIGAN
    Tractor
    mahindra 4035

    Default Re: 4035 spits and sputters at high rpms

    Thanks for the support guys. I really like this tractor when it is running good lots of power and when it hits the field Im sure it will do all that I ask.

  10. #50
    Bronze Member
    Join Date
    Mar 2012
    Posts
    93
    Location
    Dardanelle, AR
    Tractor
    Many Mahindras

    Default Re: 4035 spits and sputters at high rpms

    I have had no problems with timing on 35 series tractors. Replace the fuel lines from the tank and it will most likely fix your problem.

    Dave

Page 5 of 6 FirstFirst ... 23456 LastLast

Similar Threads

  1. Radiator spits via overflow tube
    By Gregster613 in forum TYM Owning/Operating
    Replies: 21
    Last Post: 09-18-2012, 08:55 AM
  2. Sudden high RPMS!
    By PatS in forum Kioti Owning/Operating
    Replies: 26
    Last Post: 12-08-2011, 09:06 PM
  3. Tractor sputters at high throttle?
    By browndd1 in forum Parts/Repairs
    Replies: 11
    Last Post: 11-15-2010, 02:06 AM
  4. bota spits and sputters,dies out then comes back to life
    By escavader in forum Kubota Owning/Operating
    Replies: 36
    Last Post: 12-08-2006, 09:51 AM
  5. Skid loader pedals lock under high rpms
    By TeXXXas in forum New Holland Owning/Operating
    Replies: 0
    Last Post: 09-14-2004, 04:42 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.