2manyrocks
Super Member
- Joined
- Jul 28, 2007
- Messages
- 7,322
Picked up a 2005 model 3525 with about 400 hours. After cleaning the electrical connectors, I got the front lights to work, but none of the electrical guages (volts, fuel, temperature) are working. The prior owner let it sit outside and apparently never changed a filter.
I've checked all the fuses, and they are good. Cleaned the contacts in the electrical connectors beneath the steering wheel. cleaned and tightened the alternator outputs. Getting 12.89 v at the battery with the engine off and 14.17 volts with the engine at idle.
Is there a relay that would cause all the electric gauges not to work?
This unit also has a loader. Is there an easy way to change the air filter without removing the loader?
What engine oil and filter?
Dealer already changed the hydraulic oil and filters and the fuel filters.
Also looking for a copy of an owner's manual if anybody can help me out.
Thanks.
I've checked all the fuses, and they are good. Cleaned the contacts in the electrical connectors beneath the steering wheel. cleaned and tightened the alternator outputs. Getting 12.89 v at the battery with the engine off and 14.17 volts with the engine at idle.
Is there a relay that would cause all the electric gauges not to work?
This unit also has a loader. Is there an easy way to change the air filter without removing the loader?
What engine oil and filter?
Dealer already changed the hydraulic oil and filters and the fuel filters.
Also looking for a copy of an owner's manual if anybody can help me out.
Thanks.