6000 to 7520 advice please

Slippy · 07-24-2006, 06:35 PM

Thinking about moving up from my 6000 to 7520. Have read all the specs but wondering if any of you out there have actually done this. If so, do you think there is a substantial difference in the two? I have been pretty happy with the 6000 but after all day of loader work, the f/r lever starts to wear on your arm and my knee is sore. Guess I'm getting older. Wondering if the 7520 set up is any different. Also could us some more hp to pull my 10' cutter in tall grass.
My dealer went out of business and the nearest dealer is new with only a few small units on the deck. With Mahindra's terms with its dealers, its no wonder.
At any rate, I am wondering if my wheel weights will switch over and what I will have to do to get my back hoe hooked up. New sub frame totally?

Also, interested in prices on the 7520. Local guy says 32k with loader.

Any advice, suggestions, etc.
Thanks

LarryRB · 07-24-2006, 08:12 PM

Slippy
check your PM's.

jwcinpk · 07-31-2006, 09:20 AM

Let us know what you decide to do. I'd be interested in how much you get in trade for the 6000.

07-24-2006, 06:35 PM	#1 (permalink)
Slippy Platinum Member Join Date: Sep 2002 Location: Ohio Posts: 877	6000 to 7520 advice please Thinking about moving up from my 6000 to 7520. Have read all the specs but wondering if any of you out there have actually done this. If so, do you think there is a substantial difference in the two? I have been pretty happy with the 6000 but after all day of loader work, the f/r lever starts to wear on your arm and my knee is sore. Guess I'm getting older. Wondering if the 7520 set up is any different. Also could us some more hp to pull my 10' cutter in tall grass. My dealer went out of business and the nearest dealer is new with only a few small units on the deck. With Mahindra's terms with its dealers, its no wonder. At any rate, I am wondering if my wheel weights will switch over and what I will have to do to get my back hoe hooked up. New sub frame totally? Also, interested in prices on the 7520. Local guy says 32k with loader. Any advice, suggestions, etc. Thanks __________________ Slippy

07-24-2006, 08:12 PM	#2 (permalink)
LarryRB Veteran Member Join Date: Apr 2004 Location: upper central Connecticut Posts: 1,593	Re: 6000 to 7520 advice please Slippy check your PM's. __________________ "this morning I woke up with nothing to do, it is now afternoon and I have over half of it done" Digging in hard clay is easier than going fishing to a worm..

07-31-2006, 09:20 AM	#3 (permalink)
jwcinpk Platinum Member Join Date: Aug 2003 Location: Welfare Capital of the World Posts: 813	Re: 6000 to 7520 advice please Let us know what you decide to do. I'd be interested in how much you get in trade for the 6000.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode