Results 1 to 8 of 8
-
04-21-2012, 05:54 PM #1New Member
- Join Date
- Apr 2012
- Posts
- 1
- Location
- NH
- Tractor
- None..Yet
GC2310 Pricing & Advice(NH)
Hi All,
I'm new to this forum and don't currently have any tractor. I grew up running mill & construction equipment but it's been quite a few years since then and I'm sure a lot has changed. I have a bunch of projects around the house and also own another 2 acre property with a bad driveway and large lawn to mow. Tomorrow a friend and I are heading out to look at a GC2310 w/493hrs. Equipped (standard I think) with a hoe, loader and belly mower, asking price is $12,500.
First question - how reasonable is the price? My gut says it needs to come down to 11ish?
Second question - what do I need to be looking for? I'm fairly mechanically inclined and am taking a good friend who is very good mechanically. However are there any common problems with these we should be checking for?
Third question - at just under 500hrs what maintenance intervals should have been completed?
Any other advice? Thanks in advance!
-
04-22-2012, 02:02 PM #2Platinum Member
- Join Date
- Dec 2011
- Posts
- 521
- Location
- S/O Joplin, Missouri
- Tractor
- Massey Ferguson 1526 Hydrostat
Re: GC2310 Pricing & Advice(NH)
I often check prices at www.tractorhouse.com You can get an idea of what things are going for on both new and used tractors. However they don't always have lots of listing at any one time. Good luck!
-
04-22-2012, 02:08 PM #3Elite Member
- Join Date
- May 2004
- Posts
- 3,793
- Location
- Innisfil, Ontario, Canada
- Tractor
- MF 1635 12x12 Powershuttle
Re: GC2310 Pricing & Advice(NH)
Go price a new one. That is a good price for the 2310. Ask for the service re ords.
Here are two...
http://www.marketbook.ca/list/list.a...lx=exact&LP=THThanks,
Will
I do not care if someone's net nanny is watching!! You need to stop...
-
04-22-2012, 02:26 PM #4
-
04-22-2012, 04:57 PM #5Bronze Member
- Join Date
- Nov 2010
- Posts
- 94
Re: GC2310 Pricing & Advice(NH)
2310TLB in older unit with heel hoe forward reverse, remember new 2010 or newer 2410TLB HAS TWO pedal side by side come with two year warranty and cost $15,000.00 to $16,000.00
I think the price is high for year and hours, if you buy used from dealer you can get a warranty. service on this sytle 2310 or 2410 is first 50 hours and then every 100 hours after.
-
04-29-2012, 07:36 AM #6
Re: GC2310 Pricing & Advice(NH)
I've got one of the "last" 2310s (2007), which had a lot of improvements over earlier ones, like a transmission oil filter guard, among other things. If the one you're looking at is an older one, check it over carefully. There's a thread here on problems that have been encountered with 2310s, many of which were addressed with later models.
Mine has been largely trouble-free, now has 311 hours showing, and I use it for snow-blowing, log-lifting, tilling, digging with the backhoe, hauling with the FEL, and they make great lawnmowers as well.
Oh- and welcome to TBN!
'07 GC2310 TLB, 2360 snowblower, 2325 MMM, Bro-Tek thumb, Woods GTC40-2 tiller, Woods RB-60 back blade, KK TYR-60 landscape rake, DR 60" Power Grader
'05 VW Jetta Wgn TDI
Numerous antique Japanese motorcycles
-
05-01-2012, 08:56 PM #7
Re: GC2310 Pricing & Advice(NH)
Contribute if you can. https://secure.onefundboston.org/pag...ribute/default
Man is not free unless government is limited.
Ronald Reagan
-
05-02-2012, 06:31 AM #8
Re: GC2310 Pricing & Advice(NH)
Ha-ha, Pixguy! I AM an "older guy"-- just have genes from my mother's side of the family so I've never looked my age. Try to never act it, either!

Last time I was "carded" (for 21), I was 32, if that gives you an idea.....
Not bad now, but a royal pain in the butt when I was younger....
'07 GC2310 TLB, 2360 snowblower, 2325 MMM, Bro-Tek thumb, Woods GTC40-2 tiller, Woods RB-60 back blade, KK TYR-60 landscape rake, DR 60" Power Grader
'05 VW Jetta Wgn TDI
Numerous antique Japanese motorcycles
Similar Threads
-
Price Check Massey Ferguson GC2310 pricing help!!
By RobiBX2230 in forum Buying/Pricing/ComparisonsReplies: 7Last Post: 03-26-2012, 02:14 PM -
Buying Advice Just got some pricing on a 84" Woods Bush Hog
By High Brook Hills in forum Buying/Pricing/ComparisonsReplies: 16Last Post: 10-20-2011, 09:48 AM -
2415 gear or 2516 shuttle pricing
By dem45133 in forum Mahindra Buying/PricingReplies: 2Last Post: 06-20-2011, 10:05 AM -
Price Check LK3054XS Pricing is available, NOW
By KiotiDave in forum Kioti Buying/PricingReplies: 5Last Post: 02-26-2004, 04:24 PM


Reply With Quote

