Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12
  1. #11
    Gold Member
    Join Date
    May 2012
    Gidgiegannup Springs, Western Australia
    Massey Ferguson 148 .Chamberlain Super 70. Caterpillar D4. Chamberlain 354 FEL.Toro 268 rideon kubota L2002fel

    Default Re: Couple more MF 135 Questions

    G'day scott1-------9.
    O.k. The little knurled head adjuster Withthe engine running and the oil hot set the draft lever in the up position and the Position lever in the Transport position then using your fingers move the control valve and listen and watch the lift arms ,they should go down a bit when you move the control valve ,if they do turn the knurled adjuster IN that is screw it into the control arm about one turn should be enough, If this does not work The lift cover will have to be removed ,Let me know and I will talk you through this part.

    P.S. HUTCH !!

  2. #12
    Bronze Member
    Join Date
    Sep 2012
    Weatherford, TX
    '69 MF 135

    Default Re: Couple more MF 135 Questions

    The position lever is still not controlling anything. I tried to take the lift cover off unsuccessfully. I undid everything and got it up about an inch but didn't know what to disconnect to get the rig free. Then as I put it back down the retention springs had come out and I believe the ram cylinder came out as well. I was going to take it to the dealer today but if I can figure out how bot get the lift cover off that would have me $200-300 right from the start.

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Couple MF 135 questions?
    By scott123456789 in forum Massey Ferguson Classic/Vintage
    Replies: 4
    Last Post: 10-01-2012, 09:55 PM
  2. New to 9N with a couple of questions
    By SaguaroSqueezer in forum Ford Vintage Tractors
    Replies: 2
    Last Post: 11-25-2011, 06:44 PM
  3. couple questions ...?
    By rioravioli in forum John Deere Owning/Operating
    Replies: 4
    Last Post: 06-12-2009, 11:58 AM
  4. Couple questions.
    By Resonator in forum Kubota Owning/Operating
    Replies: 3
    Last Post: 12-16-2008, 07:34 PM
  5. New Here. Have a couple of questions
    By Nomoregears in forum New Holland Owning/Operating
    Replies: 5
    Last Post: 02-22-2006, 10:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
© 2018 TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.