Results 1 to 6 of 6
  1. #1
    New Member
    Join Date
    Nov 2012
    Posts
    2
    Location
    Mead, Washington
    Tractor
    John Deere 430U

    Exclamation Massey Ferguson 2135 Loader Mount

    I am a new owner of a Massey Ferguson 2135 Turf Special. I have acquired a loader that I believe will fit the tractor nicely. It's a DuAl 110 loader. I also was fortunate enough to acquire a loader mount, but the problem is that it was built for a Ford 3000. I'm desperately wanting to get this loader mounted before next winter rolls around. Any help and any close up pics of how to mount the loader would be greatly appreciated. Thank you.

  2. #2
    Elite Member
    Join Date
    Apr 2012
    Posts
    4,100
    Location
    Middle Tennessee
    Tractor
    My tractor is an old MF

    Default Re: Massey Ferguson 2135 Loader Mount

    Quote Originally Posted by FarmerDay92 View Post
    I am a new owner of a Massey Ferguson 2135 Turf Special. I have acquired a loader that I believe will fit the tractor nicely. It's a DuAl 110 loader. I also was fortunate enough to acquire a loader mount, but the problem is that it was built for a Ford 3000. I'm desperately wanting to get this loader mounted before next winter rolls around. Any help and any close up pics of how to mount the loader would be greatly appreciated. Thank you.
    If you Google 2135 it will bring up numerous pictures with loader. I can't help you on mounting a Ford loader on a Massey Ferguson. The pictures might enlighten you as to how a loader mounts on a 2135. Good luck. -kid

  3. #3
    New Member
    Join Date
    Sep 2004
    Posts
    3
    Location
    Lockport, NY
    Tractor
    2011 NH T1520, 1965 MF 2135 Industrial TLB, 2001 JD SST18

    Default Re: Massey Ferguson 2135 Loader Mount

    I have a 66 MF 2135 that came with the MF 200 loader and the MF 185 backhoe. I don't know how the DuAl mounts but I have had my 200 on & off the tractor a few times in the last 25 years. Let me know how I might be of help with pictures or diagrams. The MF 200 mounts w arms to the grille guard and lower arms going back to the rear subframe arms by the fender bolts.
    Rick

  4. #4
    New Member
    Join Date
    Nov 2012
    Posts
    2
    Location
    Mead, Washington
    Tractor
    John Deere 430U

    Default Re: Massey Ferguson 2135 Loader Mount

    It would be nice to get some up close pictures of how to loader mount mounts to the underside of the tractor. Include all the points of contact please. Also maybe how thick of metal the mount is made with just in case I have to fabricate one up myself.

  5. #5
    Bronze Member
    Join Date
    May 2012
    Posts
    52
    Location
    Northern VA
    Tractor
    Massey 2135, Sears Lawntractor

    Default

    I'm looking at getting a MF2135, and took a look at how they attached the MF200 loader.

    They welded it to the bottom rear plates that straddle the axle. These plates are thick, and are also used to support the Ford roll bar (blue)

    See rear pic.

    I also have side pics, to show how the frame fits in. If I get the tractor, I load up some more pics.

    -forumrunner_20130701_123139-png



    -forumrunner_20130701_123217-png



    -forumrunner_20130701_123255-png

  6. #6
    Bronze Member
    Join Date
    May 2012
    Posts
    52
    Location
    Northern VA
    Tractor
    Massey 2135, Sears Lawntractor

    Default

    FarmerDay92,

    I took a closer look at mine.

    The rear of the Massey 200 loader has tubes that extend back to the rear axle. The tube was welded to a steel plate 1-1/4" x 5" x 8" that is through-bolted onto the axles at the flat point. Looks like additional steel plate was welded on for stiffness.

    The front is a welded frame made of 1/2" steel, with 4 bolts at the underside of the motor. The frame bottom is a 13" wide x 28" plate with 3" bent edges, tapered to 1-1/2 for clearance under the tractor.
    The bottom front frame band is 1/2" x 6" wrapped on the front. The upper frame band is 4-1/2"x1/2" and forms a profile similar to the hood nose. The upper front band is about the same height as the loader attachment, and is 4-1/2"x1/2" steel.

    .
    Attached Thumbnails Attached Thumbnails -forumrunner_20130825_163420-png   -forumrunner_20130825_163501-png   -forumrunner_20130825_163533-png   -forumrunner_20130825_163604-png   -forumrunner_20130825_163644-png  

    -forumrunner_20130825_163737-png   -forumrunner_20130825_163815-png   -forumrunner_20130825_163843-png  

Similar Threads

  1. Massey Ferguson 1855 Loader
    By toppop52 in forum Massey Ferguson Owning/Operating
    Replies: 0
    Last Post: 01-24-2013, 08:05 AM
  2. Loader Looking loader for Massey Ferguson 1225
    By rtyndallnc in forum Massey Ferguson Owning/Operating
    Replies: 4
    Last Post: 10-24-2011, 12:19 AM
  3. What loader for a Massey Ferguson 180???
    By Vermin Achers in forum Owning/Operating
    Replies: 1
    Last Post: 10-21-2009, 07:20 PM
  4. Industrial Massey Ferguson Loader ?
    By Killin Time in forum Massey Ferguson Owning/Operating
    Replies: 6
    Last Post: 02-20-2009, 10:44 PM
  5. 1530 Massey Ferguson Loader
    By tensaw12 in forum Massey Ferguson Owning/Operating
    Replies: 2
    Last Post: 09-24-2006, 09:47 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.