Results 1 to 4 of 4
  1. #1
    Join Date
    May 2013
    65 massey

    Default need rear brakes on mf 65

    Hello onmy 65 I need to redo the brakes plan on putting all new parts and seals how big of a job is it to do ???

  2. #2
    Elite Member
    Join Date
    Sep 2010


    Its not to big of a job as long as you have some mechanical ability and a service manual to guide you through.

  3. #3
    Platinum Member
    Join Date
    Feb 2012
    Germanton, NC
    Kubota MX5100F IH McCormick Farmall 140, Massey Ferguson 135

    Default Re: need rear brakes on mf 65

    To me the biggest issue was handling the loaded rear tire on our MF 135. I needed a second person for that part of the job. The rest was like doing drum brakes on a truck or car. I am guessing the MF 65 isn't a lot different.
    Beware of the barrenness of a busy life....Socrates

  4. #4
    New Member
    Join Date
    Jul 2010
    massey 65 B275

    Default Re: need rear brakes on mf 65

    I did mine last year if you have an engine lift it is not to bad a job the brakes are inside the axle housing you have to split it of the differential housing when you get it removed you will see a plate that has to machine screws holding it on remove them and you can get at the brakes when I did mine I replace the seals and some bearings that were pitted. The engine lift makes it much easier as the castings are very heavy if you don't have one I would rent one

Similar Threads

  1. Rear axle case (Brakes)
    By Spidermonkeywrench in forum Hydraulics
    Replies: 7
    Last Post: 10-29-2012, 02:17 PM
  2. Individual Rear Brakes
    By beckmurph in forum Kubota Owning/Operating
    Replies: 5
    Last Post: 04-04-2011, 08:57 AM
  3. 225 rear brakes
    By MESSMAKER in forum Bobcat Tractors
    Replies: 1
    Last Post: 08-12-2009, 07:12 PM
  4. brakes front vs rear axle
    By schmism in forum Trailers & Transportation
    Replies: 7
    Last Post: 04-16-2008, 08:26 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
© 2018 TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.