MF 35 half shaft collars

   / MF 35 half shaft collars #1  

rogert5

New member
Joined
Jan 15, 2015
Messages
4
Location
sussex
Tractor
MF 35
Hi all
could anyone tell me the correct way to remove the half shaft collars so I can get to the outer seals on my MF 35?
Thank you if you can help.

Roger.
 
   / MF 35 half shaft collars #2  
Hi all
could anyone tell me the correct way to remove the half shaft collars so I can get to the outer seals on my MF 35?
Thank you if you can help.

Roger.

Not sure what you mean by half shaft collars.
 
   / MF 35 half shaft collars #3  
:welcome:
To the forum from Northwest Alabama.
 
   / MF 35 half shaft collars #6  
Press them off.
 
   / MF 35 half shaft collars #7  
I use a SHARP air chisel to expand the old collars, then press off the bearing and collar together
 
   / MF 35 half shaft collars
  • Thread Starter
#8  
I use a SHARP air chisel to expand the old collars, then press off the bearing and collar together

Thank you. Job's done. Split the collars easily but had to make up a thick plate to hold the bearing housing safely as there was not enough showing to press against.
 
 
Top