drafft control boot replacement to35

   / drafft control boot replacement to35 #1  

Dieseljeeper

Member
Joined
Aug 11, 2015
Messages
29
Location
Spanaway, wa
Tractor
Ferguson to35
Howdy, I'm going to have to replace my draft control boot. I recently purchased the tractor and found signs of water in the gearbox/hydraulic oil. The only place I could see where it could be getting water is through that boot. The shift and range control boots look new but the draft control boot is almost gone. First, is this a possibility or have I been indulging in controlled substances. Second, from looking at it and the repair manual I looks like I could pull the Allen screws out of the pivot and the yoke and pivot comes off giving me access to the boot. I haven't been into this before so any advise would be really appreciated. Thank, Steve
 
   / drafft control boot replacement to35 #2  
Often its rusted bad, on mine I just replaced the whole thing with new parts, costs almost nothing.
 
   / drafft control boot replacement to35 #3  
And buy a original part, my replacement is almost as bad after 2 years as the 40 year old that it replaced.
 
   / drafft control boot replacement to35
  • Thread Starter
#4  
Thanks, I just got the boot today and am going to change it out tomorrow. Mine is pretty much rotted off
 
   / drafft control boot replacement to35
  • Thread Starter
#5  
I bought the boot from yesterday's tractors and it appears to be an OEM part
 
 
Top