Results 1 to 3 of 3
  1. #1
    New Member
    Join Date
    Apr 2008
    Posts
    1

    Default Massey Ferguson M-50 Oil

    I have a Massey Furguson MF-50. I need the change the oil the tranny case and rear end. I know there is a hydraulic unit in there. What type of oil do I use? Are they the same for the front and back? Please, all help is greatly appreciated. Thanks.

  2. #2
    Platinum Member MFRED's Avatar
    Join Date
    Mar 2006
    Posts
    953
    Location
    Connecticut
    Tractor
    MF 5435, MF 165

    Default Re: Massey Ferguson M-50 Oil

    Trans & Rear Axle-Permatran or a good quality Transmission Hydraulic Oil

  3. #3
    New Member
    Join Date
    Feb 2008
    Posts
    16

    Default Re: Massey Ferguson M-50 Oil

    Need to check your owners manual, do not know what year your tractor was made, but the trans/hyd oil requirements changed as the years progressed.

    This is a critical issue, do not put the wrong oil in this sump.

    The wrong oil could ruin the hydraulic pump or trans bearings.

    Let forum members know what year your tractor was made and they can tell you the correct oil to use.

    Also check with MASSEY FERGUSON AGCO DEALER

    Takes about 8 gals I think,

    Note: have heard of some that put regular motor oil like 10w40 in this sump and say it works fine. Guess that's fine for them but would not want to place 10w40 in the trans/hyd sump on my little TO-35. It has run fine for 50+ years using the correct oil, 90 weight mineral oil, plan on continuing to use that oil.

    Good luck,

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2016 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.