magyarbacsi
Silver Member
- Joined
- Sep 8, 2007
- Messages
- 110
Just noticed that all this past years my lift arm on my 165 was not lifting with the position lever at any position and no response at all. I had to use the draft contol in the transport position to lift it and then it would hunt once I set the brush hog height. I can always use a fixed position using a length of chain as I use the 165 for brush hog or box blade work only. I would however like to have the pump and the lift unit fixed. Is there a place that will exchange the unit out with mine. I have a shop manual, but the time and tools I dont have. Its been this way eversince I had it, but did not know enough as what to look for. My first tractor, and I gues I can use it like this for more years. The Perkins is strong as ever at 3700 hrs and not a puff ever, except when I first fire it up and then just a single puff.