Need Pricing Info on a 2006 GC2300

[DEWFPO]

I am considering selling my 2006 GC2300 and need retail pricing data. My neighbor is wanting to buy it and I want to have real word data to give him a price.

The unit is a 2006 delivered in April 2006, it has 77.8 hours on it. Ag tires. I installed Amsoil synthetics at the 50 hour service. It has been garaged since new. It has an engine block heater, dual working lamps on the ROPS, side handles from a JD2305, a 2350, 4' FEL, 2360 50" Snowblower with electric chute rotator, front folding grille protector and a 2315, 54" MMM (mulching/finish). It's in perfect condition.

Please let me know what you realistically think the retail (not trade-in) price is.

Thanks for all your input.

DEWFPO

 

[FredWalter]

side handles from a JD2305

To change the subject from pricing - where did you put the handles? Do you have photos uploaded (or that you could upload)?

 

[DEWFPO]

I mow in very hilly terrain and often I am driving or mowing in an off-camber situation so I try to balance myself by hooking my hand under the rear wheel fender but the JD2305 has these nice handles so I ordered them online thru the JD website and they were delivered to the local JD dealer. It cost $11.50 for both handles. I will take photos and post them,

DEWFPO

 

[MEhorseFarm]

I have often thought that handles on the fenders would be a good addition for this tractor as I also operate on hilly terrain. My old Kubota B7300 had fender handles and I do miss them at times. I would be interested in seeing pictures also.

 

[DEWFPO]

I made sure they were located in a comfortable, practical location so my hand would automatically grab for them in that area.

Here you go. DEWFPO

 

[MEhorseFarm]

That works! Thanks for sharing. I am gonna have to get some of those.

 

[DEWFPO]

The JD P/N is LVA12750, they were $5.75 and you need 2. I used big fender washers and Nylock nuts on the backside.

DEWFPO

 

[irvingj]

Wow, Walt, those handles look great-- I'll have to see if I can still fit the 2310 in where I park it, if it had a few extra inches at the waistline!

On another note-- I did get a hitch put on my bucket, as per an old thread; already used it a number of times. Used a U-Haul 2" to 1-1/4" adapter.

Why you sellin'? Thinking of going larger?

 

[LBrown59]

That works! Thanks for sharing. I am gonna have to get some of those.

I don't hafta do that .
My BX23 and my 2 BX1500s came standard with the handles
See photos.
http://www.tractorbynet.com/forums/1421009-post2.html
I'm glad my handles are on top of the fenders .
Less likely to get broken off than they would be on the side of the fenders.

 

[LBrown59]

Wow, Walt, those handles look great--
1* I'll have to see if I can still fit the 2310 in where I park it, if it had a few extra inches at the waistline!

1*You won't have to worry about extra inches if you put the handles on top of the fenders like this.
http://www.tractorbynet.com/forums/1421009-post2.html
Then 2 they are less likely to get knocked of there than they would be on the sides of the fenders.

You may want to check with Kubota on the handles before rushing over to JD.
They may fit your tractor better than the jd ones and cost less.