 Re: Problems with new backhoe on GC 2610
A hydraulic hose series is usually tested at about twice the expected pressure. Either the hose is not meeting spec, or it was damaged , or you are generating excessive pressure by reverse ram effect. Your pump would be putting out pressure as it has been, and you have reliefs, on the valve.
Weak hose or excessive pressure. Just what did the damage look like, hose burst in the middle, fitting blew out, etc.
__________________
J.J.
When I works, I works hard. When I sits and thinks, I goes to sleep.
Git er done, if-fen you want to.. | 
Linear Mode
