Results 1 to 2 of 2
  1. #1
    New Member
    Join Date
    Aug 2006
    Jacksonville, Alabama
    Massey Ferguson 1250

    Default Starter Relay

    MF 231 won't start with key. Safety switches OK. I want to check the relay, but not sure where it is. There is a box on the back side of the dash under the RPM gage and just to the right of the light switch with three wires running to it; green, red, and black. Is this the relay? Any way to check it? Thanks.

  2. #2
    Gold Member m7040's Avatar
    Join Date
    Sep 2006
    Kubota M7040, MF 203 industrial, ZD28, RTV 1100 ,

    Default Re: Starter Relay

    The relay is usually located on the starter. It moves the gear on the starter in to engage the ring gear and also closes the contactor to allow current to the starter motor. Commen way to check it out is to provide a jumper wire with power to the relay terminal to see if there was something wrong with starter switch or wiring. Next if still no result then jump from batery to main terminal on the starter. If the starter turns then you have a bad relay.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
© 2018 TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.