Page 1 of 2 12 LastLast
Results 1 to 10 of 16
  1. #1
    New Member
    Join Date
    Dec 2011
    Posts
    7
    Tractor
    MCCORMICK MTX125 2004

    Default GEAR PROBLEM

    HELLO,
    I HAVE A MCCORMICK MTX125 WITH 5200 HOURS,
    THE TRANSMISSION HAS 16 SPEEDS AND SHIFTED BY ELECTRIC BUTTON.

    I HAVE A PROBLEM BETWEEN THE 8 GEAR AND THE 9 GEAR AND BETWEEN THE 12 AND THE 13 GEAR. SOMETIMES IT STACTS BETWEEN THE 9 TO THE 12 AND DOSN'T GO DOWN, OR STACTS IN THE 8 GEAR AND DOSN'T GO UP, IF SOMEONE HAS AN EXPERIANCE WITH A SAME PROBLUM, OR WAYS HOW TO SOLVE THE PROBLUM. THE OIL LEVEL TRANSMISSION IS O.K. AND THE BATTERY IS O.K. AND THE VOLLTAGE IS 14 WHEN THE ENGINE IS RUNNING.

    THANK YOU!

  2. #2
    Silver Member
    Join Date
    Dec 2011
    Posts
    226

    Default Re: GEAR PROBLEM

    The changes you are having difficulty with are range changes where 2 gears have to shift!!
    The system has error diagnostics built in what error codes are displayed??

    Also on range changes a quick or time delayed change can be selected, which is yours configured to ???

    What is the serial no of your machine????
    Last edited by cyrush; 12-22-2011 at 04:37 PM. Reason: xxxx

  3. #3
    Silver Member
    Join Date
    Dec 2011
    Posts
    226

    Default Re: GEAR PROBLEM

    ronnyarbi

    Awaiting your reply so i can help you fix this problem

    I am the McCormick territory service manager who developed the field diagnostics on this gear change when it was first marketed by McCormick !!!

  4. #4
    New Member
    Join Date
    Dec 2011
    Posts
    7
    Tractor
    MCCORMICK MTX125 2004

    Default Re: GEAR PROBLEM

    Do you mean chassi number?

  5. #5
    Silver Member
    Join Date
    Dec 2011
    Posts
    226

    Default Re: GEAR PROBLEM

    YES ??

  6. #6
    Silver Member
    Join Date
    Dec 2011
    Posts
    226

    Default Re: GEAR PROBLEM

    The information i have is in a no of formats !!!

    Are you operating a PC with windows or aMac with Mac OS ??

    do you use Windows office "Word" & "Powerpoint" ???

    Can u read "PDF" documents. ???
    Last edited by cyrush; 12-30-2011 at 03:14 PM. Reason: zzzzz

  7. #7
    New Member
    Join Date
    Dec 2011
    Posts
    7
    Tractor
    MCCORMICK MTX125 2004

    Default Re: GEAR PROBLEM

    Quote Originally Posted by cyrush View Post
    YES ??
    the chassi number: JJE3332829

    THE ENGINE NUMBER: YH50919U815027K


    THANK YOU.

  8. #8
    Silver Member
    Join Date
    Dec 2011
    Posts
    226

    Default Re: GEAR PROBLEM

    Your tractor was built in early Nov 2003.

    So i can get a feel for it some questions??

    Are you the original owner ??

    Do you know if it has had any suftware updates ??

    Has the shuttle shift been modified by addition of an extra solenoid valve and anew controller ??

    Some of the documents are too large to post on this forum, i meed your e mail address so i can send them to you, and i need answers re your PC and document reading capability ????

  9. #9
    New Member
    Join Date
    Dec 2011
    Posts
    7
    Tractor
    MCCORMICK MTX125 2004

    Default Re: GEAR PROBLEM

    I am not the original owner, but I have the tractor for 2.5 years.
    I don't know if it has had any suftware updates
    I don't think sow , how can I know, can you send me a picture so I can chek it?
    my E-MAIL address -

    arbiv.roni@gmail.com

    thank you very much

  10. #10
    Silver Member
    Join Date
    Dec 2011
    Posts
    226

    Default Re: GEAR PROBLEM

    E mail sent with 10 documents for you to read through ????

    The only person who can confirm which software is in the controller is your local McCormick dealer with his diagnostic laptop.??

    See att Service Bulletin 6008 shows an extra valve fitted over shuttle block , located under rear of cab on top of transmission. Is this fitted ???.
    Attached Files Attached Files

Page 1 of 2 12 LastLast

Similar Threads

  1. Power Steering Problem Not Solved
    By Alan L. in forum Kubota Owning/Operating
    Replies: 87
    Last Post: 03-31-2011, 06:35 PM
  2. Arctic Cat 366 Gear shift problem
    By budgie9 in forum ATVs & Utility Vehicles
    Replies: 0
    Last Post: 09-26-2009, 05:02 PM
  3. Yanmar Models
    By DeltaWebmaster in forum Yanmar
    Replies: 13
    Last Post: 10-03-2008, 08:21 AM
  4. 1428v hydro gear select problem
    By GaryS in forum Massey Ferguson Owning/Operating
    Replies: 4
    Last Post: 01-19-2005, 10:00 PM
  5. new tc 29d gear problem
    By Anonymous Poster in forum New Holland Owning/Operating
    Replies: 24
    Last Post: 01-22-2002, 02:10 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.