Recent content by 860thomasb

I'm using the rear PTO on my tractor for the first time drilling post holes with a lienbach PHD. The PTO shifter gets locked up and will not disengage. I have been able to disengage the PTO by shutting down the engine(but that doesn't always work), Putting the tractor in gear and moving forward...

Got my first tractor recently and I need to install a fence.I'm about to bid on a Lienbach 7300 post hole digger. The add gives a weight of 275 pounds. Are they really difficult to install onto the 3 point hitch because of the weight and how is the drill lifted from a 3 foot deep hole?

I've determined with all of your help that my loader is a B219. I'm trying to locate an operators manual for it. In the mean time can any one tell me how to check the hydraulic oil level. The oil is stored in the right vertical frame post but there is no dip stick. There is a small amount of...

The tractor is pretty old, 3700 hours, probably early 80's. The FEL although painted orange has no visible identification. There are two operating levers on the right loader arm, the left one rases and lowers, the right one curls the bucket. There is a spin off cap just behind the levers. Is...

I recently bought an older B7100. The guy I bought it from suggested I change the exhaust pipe from horizontal to vertical. The pipe was blowing on the Loader hydraulic lines. Any advice would be appreciated