Recent content by ak9

I built this backhoe mounted PHD awhile back works great... here is the thread when i was building it ...hope it helps ... https://www.tractorbynet.com/forums/threads/help-converting-pto-phd-to-hyd-phd.302373/

there was a recall on the sliders {plastic} that shattered ..the "factory" fix was machined aluminum blocks that replicated the plastic ones....the photos posted appear to be missing the plastic slider blocks

Hello all My sister who lives 1000 miles away from me bought new (2018) Kubota L2501 & fel #2545 c . I'm putting together a 3rd function on loader for her b day present in a late march visit and could use some tech. help from you all. The loader valve is Besko -Dunkin HDMO3/2-175-FR-LCB-OH-02...

I've a Wallenstein back hoe and I ordered /received the power beyond sleeve for the valve .I am unsure as to the thread type on the down stream side of this sleeve . Tech support at Wallenstein informed me it was an NPT thread type, which I am sure it is not! It does seem that SAE o ring...

I'm in the process of fabricating a PHD to be mounted on the thumb of my back hoe .The tractor is 45 hp with a 14gpm hyd pump~2500psi. The back hoe is plumbed by a rear remote with 1/2" lines . This project is twofold being that when the phd is not installed my intent is to use the new hyd lines...

this is the little tire that blew ... I know it is easier to fill with a compressor ... An if you have a reg that goes to 5-10 psi then it might be safe ... However I ,in the future will be filling these type tires with a hand pump....I 'll say this ,my wife is very mechanically talented...

So the other day I was working in my shop and I hear what sounds like a 3" 12 gauge shot gun fire near... too near the house.I noticed that everything got real quite .it was starting to get dark so I decided to wrap it up for the day and go see what the noise was.,...well after checking @ the...

I had a cross brand return line filter by pass valve break free on my log splitter. It 's 2 yrs old and was on its third filter.it's 3/4" in & out rated @ 20 gpm. my pump puts out max16 gpm.The spring , guide piston, and sleeve I found down stream in an elbow ... not sure what else it was...

I've a older 72" finish mower I think it's a woods .It has 3 drum rollers on the front and 2 swivel castor wheels on the rear.I'm in the process of making new drum rollers for it as the existing ones were hard plastic the bearings are shot . So , the new drum castors I made out of 3/8" x 4.5"...

About a year ago I refurbished a used log splitter using 12hp b&s vert shaft gas eng. with a new 16 gal /pm 2 stage splitter pump . It has a 4.5x1.75x25" tie rod cyl.. This set up had been working well for @ 40 ish hrs of use when the pump seal @ the shaft leaked & blew:confused3:I have a hyd...

I 'm about to put a new 30x60' standing seam roof on my tractor building. One of the the Quotes I've rec'd is for 24 guage concealed fastener painted 16" pans @ 2$ a sq ft.. The method they use to fabricate/extrude I've no experience with .. What I understand they do is bring a linear...

hi everyone about a year ago I started compiling materials to fabricate a grapple for my 6' loader bucket.I've read hours and hours on TBN to help me do this build So a big thanks to all . The hyd portion of the build I used a dual DO3 subplate with 2 o/c 12vdc scv w/one valve vacant for...

About a year and a half ago I went to demonstration on dredging an existing lake /pond at the lake in pictures. The procedures they used ( see WWW.myearthwater.com) were/are state of art. If only the Gov would of stayed out of it The dredging would be almost done by now and the tax payers $700...

I wanted to say thanks to all in the Hyd forum with the questions I had concerning this build,here are some pics of it ... still a work in progress kinda . Three weeks ago I scavanged a old home built splitter and a bunch of other parts off of CL for $300 .00 motor was junk and as it turned out...

I've a recently acuired 2 stage hyd pump this is a pic & #'s on casting are 2670017...P-59 it was on a used home built splitter when I got it last week... is it worth it to have a pump like this rebuilt or better to buy new one ? Or is this 2 stage pump able to be "self rebuilt with a kit...