Recent content by BakoJ

Have you checked the wiring under the seat? Mine was shorting out and I had to splice new wiring in and shield the wiring from rubbing on the seat frame.

That's strange. Mine was delivered with the shaft in place but my backhoe was also installed.

Here is a video I made to show how you don't have to remove a wheel from this model tractor. Please excuse my overgrown head. I need a haircut. I can almost braid it!

I'll work on a video for you. It may be Wednesday or Thursday when I get a free day.

I have this model. You do not have to remove a rear wheel/tire. The 3 point bottom has a 2 piece shaft that slides out into the void created by the interior of the wheel. I can switch from backhoe to 3pt quick hitch in less than 10 minutes.

Right! Didn't cost me a thing except for some time. And after 2 weeks and 30 hours on the LS, I finished the landscaping in the front yard. Now to go till up the garden.

Spread 7 cu yards of gravel for my front yard xeriscape project. Then drove next door and helped the neighbors out by spreading 4 cu yards of topsoil.

Great stuff!

That's correct!

And we have a winner! Before I saw your post, I connected one of the quick connects and it didn't work. Then I connected the other after a while and it worked immediately. This connection isn't color coded, like the caps and plugs. It's a little frustrating but now I know. It's a total newb...

Thanks for the idea. Just one rear kit. 3 point is directly off the pump. No problem with the loader. The flow control knob under the seat is halfway between fast and lock. I lifted the 3 point and turned the knob to off but there's no pressure or resistance. I've never used the 3 point before...

Second photo

LS MT225s I dropped my backhoe and went to attach my 3 point quick hitch. One of the hydraulic quick connect fittings came loose and jammed the 3 point control arm. I was able to loosen the quick connect, dislodge it from the controls and tighten it so it is up and out of the way. However, now...

Very nice! Would you mind telling us what you piad for it?

Oh... And I got a new trailer! My single axle was right there on the edge of safe with the LS (FEL and backhoe removed). So I got a 7'x16', dual axle utility trailer with a 7k lb capacity.