I'm dealing with what is starting to look like a bad rectifier... The battery won't charge (sitting at 10V+ when I checked last night) and is not getting the 13V+ that I'd expect with the engine running (getting about 12V). Most of the treads I've looked at so far talk about needing to pull...
I need a little sanity check here....
I spent most of Sunday AM doing the pre-winter maintenance on my B2710 (oil change, coolant drain/flush/fill, air filter, etc.) This year I also decided to replace the fuel filter since I'd never done it before...
No problems until I got to the fuel...
I have seen several posts in the past regarding damage to the door frame of garages/sheds caused by attempting to fit a an unfolded folding ROPS through an opening that was too short...
In the first couple of months that I owned my tractor I had this problem twice and finally decided to hang a...
I've been doing my homework regarding the installation of additional lighting on my 1999 Kubota B2710... There are tons of great ideas in the various threads on the subject but one thing that was mentioned several times and not discussed in detail was the required size of the alternator...
I'd like to run this idea by the Tractorbynet brain trust to see what kind of thoughts that 60000+ person-years of experience can come up with on this project...
Any one out there ever built/used a screen to sift the rocks out of either loam or gravel? I've got some seriously boney gravel...
OK...we've had our first snap of really cold weather for this season (temps in the single numbers) here in southern New England and I tried out the block heater on my B2710 for the first time.
The good news is that it seems to heat the block quite nicely (so I guess it lives up to its name...)...
Where would we be without hydraulic power?
After agonizing for several months over how to get my tools into the basement of our new house, I decided to use my new source of hydraulic power to my advantage. This past weekend I used my FEL to ever-so-gently lower my table saw and my...
My 2710 finally arrived last Tuesday! (After waiting for Woods to deliver the hoe and subframe to the dealer for over a month) What a fantastic piece of machinery! I've only been able to spend 10 hours or so playing (or working depending on your perspective ), but I've already managed to...
Has anyone out there done any plumbing/re-plumbing of hydraulics?
I'm in the process of buying a tractor (after lusting for oh so long...) with a Woods backhoe. The control pattern on the hoe is the standard (JD) backhoe pattern (boom and swing in the left hand - stick and bucket in the...
My wife and I just bought a new house with the typical builder's landscaping (read: all grass). The lot is only an acre and a half (postage stamp size compared to some of you folks) but its way more than I want to mow with the 21" Lawn Boy. I've been considering a tractor for years ("dreaming"...