Recent content by bigcontender

I picked up a rock and sheared the bolt that is next to the clutch on my G20's 48" snow blower. I replaced it with a standard 5/16 -18 x 2 1/2 bolt. I called Richards to make sure I wasn't putting the wrong bolt in vs a shear pin. Richards teck said no a standard bolt will work the spec is for...

I got stuck twice blowing snow during the last storm (9") snow. I noticed only the right rear wheel spins, is this normal? I bought new ag tires and went 400 lbs of rear weight this year and still got stuck. Advise?

I've got a fuel problem with my 20G. Last week it quit while mowing, found fuel filter empty. The original 3/8 glass filter looked somewhat dirty so I replaced it with a 5/16 plastic filter. Today it quit again while mowing. The filter was empty tank was 1/2 full. I filled the tank and it would...

My 20 G is starting to not want to go forward. In looking at the clutches there is a chunk 2" or so missing on the circumfuremce of the reverse clutch. The froward clutch looks worn but I may be able to adjust it. Looking on e bay I can buy a lining kit Gravely # 40692 for $40 or a clutch and...

I bought a used Triton Elite trailer and would like to find out the weight capacity of this trailer. Previous owner bought it from an auction, trailer is registered as a 1992 home made. Model on frame is Triton Elite, it's aluminum, inside bed size is 6' 4" by 12', with a very sturdy aluminum...

Last week I ran out of gas while using my Gravely 20g to pull a lawn roller. I added gas then the tractor would not start. Turned it over for a while, then I pulled the plugs. Both plugs we're soaked. Turned it over with the plugs out and it blew lot of gas out of the left cylinder. Put the...

OK I've set the clearance on the PTO lever @ 0.5" and the PTO will not disengage. With the tractor running I held a fireplace poker against the PTO and it will not stop. With the tractor off I got on the pto shaft with a 8" pair of pliers and I could not turn it. I did notice the PTO lever on...

I recently picked up a 424 that was repowered with a Harbour Freight Predator 346 cc motor. Also included was a 38" Gravely snowblower. This tractor was a school project for a high school shop class. Some things need to be finished throttel cable, choke cable, remote start etc. We got 8" of...

There is a 20g for sale in my area. Owner says last time he used tractor to mow the mower would not shut off. Any ideas on what it will take to fix this. Thanks