Recent content by BrittR

I use a 4' commercial quality rotary on mine as most of my rotary work is land clearing/brush/saplings etc. I got my 2400h in August and have about 35 hours on it. Tough tractor in a compact package. I've loaded the rear tires, built a back guard for the blade, added small tool box, made debris...

Made mine from 1 1/2", 1/4" wall, square tube. Bucket guard is just 1" sq tube, going to add expanded metal later. Works great for most of the stuff I pick up w/my Branson 2400h

Cross posted in the customization forum, but wanted them here in the brand forum too. (admin please remove if not allowed) Made some Debris forks that are 1.5", 1/4" wall, and fairly well sized for this 2400h Branson. Work great so far. Rear guard isn't 100% done, going to add expanded metal...

I feel it's about the right size for my Branson 2400h; 24hp, ~2,000lb, with ~1050lb lift/1800lb breakout at the bucket pins.

Here's the junk I carry in mine. Small round tin has plug/inflation kit in it. It's "full", but it all fits. I'm not usually very far from my truck, or I'd have put a larger one on as well. I plan on adding an expanded metal panel across the ROPS, and will have a rear bar to mount a larger box...

Debris forks are 1.5", 1/4" wall, and fairly well sized for this 2400h Branson. Work great so far. Rear guard isn't 100% done, going to add expanded metal across the top section once I get some. Might add some lower sections, but I wanted to leave plenty of room for grab hook use on top of bucket.

My simple one from mil .50cal can. I put fender washers on the inside, rattles a little, but not bad. Don't hear it over the motor. Would prob put a full length stiffening 1/4"x2" plate in place of the fender washers would help a lot, but it hasn't messed up yet.

putting the debris forks and Ratchet Rake to work for a few hours on my 2400H before: Friend taking a test ride Area after a couple hours work

Ugly welds but they hold. lol Thought some might like to see how I adapted my KK finish mower to my HFQH. I mow regularly with my tractor, but still use it for other things and the HFQH makes it a breeze to drop/hook up now that I took the time to adapt it. Orig. floating dog bone attachment...

Really like the features packed into my little 2400, but would have liked some tool storage. Quick and easy answer for me was 50cal ammo box which is air/water tight, and a couple fender washers (will prob make a 1" or so stiffening support bar for inside box later). Mounted it using the...

scored a nice deal on a Ratchet Rake locally for $150. Money well spent and it does a great job on scrub removal and dirt leveling so far.

I'm fairly new to the search for a good and new tractor and LS seems to be a no brainer with the bang for the buck and I'm very interested in one (leaning toward XR4040H), but I'd like a known dealer, with good service. I've seen plenty of Montana and Branson "dealers" that are located in...