Tab Content
  • CNC Dan's Avatar
    03-26-2015, 10:04 AM
    CNC Dan replied to a thread mill-scale removal in Welding
    Cover with plastic to keep it from drying, after applying acid. You will need several treatments.
    15 replies | 722 view(s)
  • CNC Dan's Avatar
    03-25-2015, 10:07 AM
    Many good hardware stores have a display board with a bunch of springs on it, all numbered. You have to ask for the number spring you want. I have...
    13 replies | 977 view(s)
  • CNC Dan's Avatar
    03-24-2015, 06:33 PM
    It's not in use on the saw. That's just for storage.
    13 replies | 977 view(s)
  • CNC Dan's Avatar
    03-19-2015, 01:05 PM
    CNC Dan replied to a thread Help! Learning to weld in Welding
    Great! Glad you found it. Those kind of problems can drive you mad. I had a friend that built a new house, and his clothes dryer quit drying. I...
    66 replies | 2286 view(s)
  • CNC Dan's Avatar
    03-18-2015, 09:04 PM
    CNC Dan replied to a thread Help! Learning to weld in Welding
    Ah Ha! Check the tightness of all screw connections. At the outlet, at the plug, at the breaker, and any other connections. Does the plug feel...
    66 replies | 2286 view(s)
  • CNC Dan's Avatar
    03-18-2015, 08:57 PM
    CNC Dan replied to a thread Help! Learning to weld in Welding
    can you put the put the plug partway into the outlet, and reach the prongs with your meters probes? If you can, see if you get 240v with the...
    66 replies | 2286 view(s)
  • CNC Dan's Avatar
    03-18-2015, 08:51 PM
    CNC Dan replied to a thread Help! Learning to weld in Welding
    I see three black wires entering the box. One is a ground and goes to a wire nut, allong with a bare copper wire that goes to the box screw, and...
    66 replies | 2286 view(s)
  • CNC Dan's Avatar
    03-18-2015, 06:03 PM
    CNC Dan replied to a thread Help! Learning to weld in Welding
    Can you post a pic of the plug on the welder, and the outlet you are connecting to. That would help a lot. Could be your outlet is wired wrong.
    66 replies | 2286 view(s)
  • CNC Dan's Avatar
    03-16-2015, 05:34 PM
    CNC Dan replied to a thread New skill to learn. in Welding
    Check out videos from mrpete222 And turnwright machine works on youtube.
    39 replies | 1525 view(s)
  • CNC Dan's Avatar
    03-14-2015, 08:06 AM
    CNC Dan replied to a thread Pacemaker + Welding in Welding
    It's not just the arc, but the entire length of leads. I would think that without any high frequency, stick welding would be best. Also try to not...
    16 replies | 589 view(s)
  • CNC Dan's Avatar
    03-13-2015, 04:51 PM
    CNC Dan replied to a thread HF Winch in Build-It Yourself
    If you use a snatch block, you can use a smaller winch. So long as you have enough cable.
    23 replies | 1152 view(s)
  • CNC Dan's Avatar
    03-13-2015, 01:03 PM
    CNC Dan replied to a thread HF Winch in Build-It Yourself
    I would use Anderson power connectors. They are used on electric fork lifts to connect the battery. They have polarity (+/-)but not gender(M/F). ...
    23 replies | 1152 view(s)
  • CNC Dan's Avatar
    03-13-2015, 10:07 AM
    CNC Dan replied to a thread Pay it forward. in Welding
    I have one of those digital levels. I made a small pearch that can be clamped to the wall of the first cut. So I make the first cut on one end,...
    60 replies | 3326 view(s)
  • CNC Dan's Avatar
    03-10-2015, 05:19 PM
    Many NAPA stores can make up hoses. Ask around, not all locations offer that service.
    29 replies | 1097 view(s)
  • CNC Dan's Avatar
    03-08-2015, 08:24 AM
    Two things that might help. Graph paper. You can get it at most bigger office supply stores. Look for the kind that has 1" squares that are...
    50 replies | 1981 view(s)
  • CNC Dan's Avatar
    03-07-2015, 11:04 PM
    Look for a free program called "beam boy". It has been a while since I've had a computor at home, but I remember that you could select shapes from a...
    28 replies | 1245 view(s)
  • CNC Dan's Avatar
    03-07-2015, 11:12 AM
    http://www.youtube.com/watch?v=ojFZ__4t7ck&feature=youtube_gdata_player
    50 replies | 1981 view(s)
  • CNC Dan's Avatar
    03-05-2015, 05:44 PM
    CNC Dan replied to a thread cutting torch in Welding
    check Craigslist first. many people buy them and then don't want them once they find out how small they really are.
    18 replies | 923 view(s)
  • CNC Dan's Avatar
    03-05-2015, 01:15 PM
    CNC Dan replied to a thread longevity forcecut 62i in Welding
    I also watch out for absolute statements. Like: all ,... never ,... always,... none,... etc.
    16 replies | 704 view(s)
  • CNC Dan's Avatar
    03-05-2015, 10:10 AM
    Listen to Jim Colt. He knows. Any time you can keep the nozzle(tip) out of electrical contact with the work(or straightedge), the better. Try...
    33 replies | 1100 view(s)
  • CNC Dan's Avatar
    03-04-2015, 06:16 PM
    That's what I was about to type. Long ago, I took a welding class, and all we used was 6010 and 7018. Students asked why not use some of the...
    17 replies | 887 view(s)
  • CNC Dan's Avatar
    03-04-2015, 10:11 AM
    Yes, that's the idea. But the nozzle(tip) still gets heated when cutting. And when you are drag cutting, current goes from electrode, nozzle,...
    33 replies | 1100 view(s)
  • CNC Dan's Avatar
    03-03-2015, 04:58 PM
    Cutting: current goes from electrode to workpiece. Workpiece is heated and blown away. Non-cutting: less current goes from electrode to nozzle....
    33 replies | 1100 view(s)
  • CNC Dan's Avatar
    03-03-2015, 10:09 AM
    You might need to add a cross member where the axles are. Would take a lot of torque off of the pieces that the axles are atached to.
    13 replies | 1341 view(s)
  • CNC Dan's Avatar
    03-03-2015, 06:25 AM
    Try to keep the non-cutting time to a minimum. That eats nozzles. Also, is your air dry?
    33 replies | 1100 view(s)
  • CNC Dan's Avatar
    03-02-2015, 05:27 PM
    It is, but it's still quite a motor. I imagine it must be a lot simpler to make the valving and cams for an air motor, than an internal combustion...
    9 replies | 1088 view(s)
  • CNC Dan's Avatar
    03-02-2015, 01:09 PM
    CNC Dan replied to a thread longevity forcecut 62i in Welding
    I was thinking the same thing.
    16 replies | 704 view(s)
No More Results
About CNC Dan

Basic Information

About CNC Dan
Location (City, State):
north shore MA.
Occupation:
cnc programer
Real Name:
Dan

Signature


Dan H.

Statistics


Total Posts
Total Posts
965
Posts Per Day
1.05
General Information
Last Activity
Today 10:04 AM
Join Date
09-27-2012
Referrals
0
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.