Recent content by Deere Toyz

Hi Folks-I am a little late to the party, but I went through the same consideration of issues when I contemplated a 3 point splitter for my 2520. Much of what I read counseled against it. I bought a used Timberwolf TW2 Heavy Duty with log lift. The TW1's are really great from my experience...

Hi Folks-I do not post much due to my schedule, but saw this thread and do have personal experience with this issue. I mow 2 acres + of lawn with several tight landscaped areas, trees, walls, a split rail fence, etc. I used to mow with my JD 2520 and a 62" heavy duty belly deck. The cut was...

Hi all-This forum has been a great resource and is in many ways responsible for my love and loyalty to all things the correct shade of green. I have owned 3 Deere tractors, with my current being a rock solid 2520 with FEL, 62D green deck with Deere blades, blower, plows, york rake, etc. My...

Hi Folks-When my blower was being repaired, I had to get a new 54" plow as I had worn through the wear edge and into the blade itself beyond the bolt holes for a new edge.(Not too smart--I know, but got a good 10 years out of it). I anticipate doing the "stall mat" mod to the new blade so it...

Hi Guys-Just put the front attachment support kit on my 2520 where spacers were between the frame and the hood guard mount. Looks like the frame attachment brackets for the 62D mower have to come off to permit install of snowblower/plow quicktatch drive shaft attachment and hydraulic kit. Is...

I just switched out my 2210 for a 2520. The new machine was delivered without the front attachment support plates installed. It looks like I need to remove the hood guard spacers and install the plates in their location. The manual is silent and I just want to make sure I have figured this...

Hi Everyone-I am new to the forum,but have enjoyed reading and learning from it quite a bit. I am moving up to a new Deere 2520 after a great experience owning and using my 2210, and all of your posts have been highly educational. I really want to thank you all for that. I will provide an...