dirtyb115's latest activity

I found this video with a TYM tractor (same manufacturer, and the PTO valve looks identical to mine. ) I see the same set screw and it...

Pump connects first to block 12 in the attached image, which the parts manual lists as Valve Assy, PTO. So the relief valve is part...

I am guessing its on this block. Part 12-02 right before the loader valve. Sure is not going to be easy to get to if that is it. It...

Long post sorry... So I am trying to figure out what the 3 positions do for the AUX. HYDRAULIC LEVER (See attached pictures). RK has...

Had to order a few more fittings, but was able to test it just now. Acting very similar, I put the gauge on one of the loader quick...

I could not see any “potential” pressure port options either. As a option you could put it in one of the quick disconnects for the...

Trying to figure out where to tap in for the loader circuit, any ideas from the pictures? I see two plugs, but the one on top is not...

Ok, i had to order some adapters but i was able to put a gauge where the plug was on the P port. Had tractor at about 1800 rpm. I ran...

Ok thanks hopefully I'll find some time this week to take a look. Also not sure if it's related but I have noticed that the boom wants...

Had a chance to take a look tonight. I pulled the plug, and as you suspected a spring/poppet. When i took it out the poppet stayed in...

Thanks for the suggestion, I'll take a look tomorrow if I have time. Appreciate the help

Dirtyb In looking at those pictures of the valve it appears there is a plug between the work ports. I suspect that is the load check for...

Here is what it looks like

Only schematic that i can find is in the operator manual. (See attatched)

Slow or weak hydraulics are sometimes caused by having the three point in the full up position. Be sure yours is not quite full up and...