Recent content by Joyryd

Hi folks, Thanks for the help it was the roll pin that broke and the shift fork was floating causing the intermittent operation of the mid pto. Problem solved thanks again.

I removed the actuator and the shaft came out with it. Is that right or should it be pinned to the shift fork. I never took one out and trying not to drain the hole transmission.

Thank you folks I am going to dig into the actuator and see where that takes me. I will keep you posted.

member Hi folks, Looking for some help with my John Deere 4310 e hydro. My machine runs fine, after about 35 minutes of use the pto shuts off. It’s like an electrical issue after warm up. I can hear and see the main pto turn on and off with the button but the mid pto doesn’t. I can let it cool...

Hi folks, Looking for some help with my John Deere 4310 e hydro. My machine runs fine, after about 35 minutes of use the pto shuts off. It’s like an electrical issue after warm up. I can hear and see the main pto turn on and off with the button but the mid pto doesn’t. I can let it cool for a...