I seem to have been able to to get the pic posted. First one shows the damaged hitch. At this point the broken brace from the top link to the top of the blade has been cut off. Second one is the worst of the damaged lift arm pin and mount. The 3x3x1/4 angle is split at vertex of the sides...
I bought a 6' box blade, Agri- something brand 15 years ago and have been using it to maintain the rocky mile long private road to my house ever since. About a year ago while using the blade as a dozer with the tractor in reverse, the brace from the top of the blade to the top of the center...
Cross posted in Century/Branson forum Engine is a 3 cyl Cummins with a Bosch Fuel Injection Pump
.
Tractor won't run above idle.
I have a 2005 3510 that I have owned since new and other than a hydraulic hose and the usual fuel pump problems, I have had no issues with it. It has just under 500...
Tractor won't run above idle.
I have a 2005 3510 that I have owned since new and other than a hydraulic hose and the usual fuel pump problems, I have had no issues with it. It has just under 500 hours. I have changed all filters and oil once a year. I ran it a month ago and the fuel lift...
The right front headlight is out on my 2005 3510 tractor. The illustrated parts breakdown that came with my tractor shows a headlight assembly but no replaceable bulb. I did a slightly more than cursory look at the headlight and it looks like the bulb socket is an integral part of the...
I have a 2005 3510 2ith about 500 hours with what I believe to be a bad ignition switch.
Got on the tractor this AM, turned the key and waited for the glow plugs to time out. Correct lights were on and fuel pump was ticking away as normal. Turned the key to start and engine started to turn...
Both FEL and rear lift arms are jerky when being raised and I can feel little thumps when I operate the hydaulics. Clearly the pump is fluid starved and cavitating. Also feel the thumps inthe steering, and the steering wheel rotates freely after the tractor has been shut down a while.
Based on...
I bought a 3510 from a dealer about 18 months ago in anticipation of using it to landscape a new house we were going to build. It had 35 hours on it and was traded in on a larger tractor. Didn't build the house but kept it anyway and it has urned out to be a great tractor.
The only issue with...