sawyerfarms
New member
- Joined
- Jul 10, 2010
- Messages
- 1
- Tractor
- Mitsubishi D1550
I have a Mitsubishi D1550 with 4.50x10 front tires. You can't find the tires anymore was able to get a set of 4.00x10 with 4.50 tubes. Problem now is wheels keep going flat, have tried slim with no luck and patching tubes.
This tractor has a 3 lug hub and what I want to do is increase it to use a 12" or 13" standard tire for the front. Has anybody done this? My current 10" rims are rusting inside and the burs are what is causing the holes I believe, I have sanded and grinded the burs but think a standard rim would be a better solution since 10" rims are hard to find as well.
I have a "donut" 13" tire and it is the right width and fits in the space with room for turning without rubbing, just bolt patterns don't fit.
Any suggestions?
Thanks,
Scott
This tractor has a 3 lug hub and what I want to do is increase it to use a 12" or 13" standard tire for the front. Has anybody done this? My current 10" rims are rusting inside and the burs are what is causing the holes I believe, I have sanded and grinded the burs but think a standard rim would be a better solution since 10" rims are hard to find as well.
I have a "donut" 13" tire and it is the right width and fits in the space with room for turning without rubbing, just bolt patterns don't fit.
Any suggestions?
Thanks,
Scott