Results 1 to 4 of 4
  1. #1
    New Member
    Join Date
    Mar 2013
    Posts
    5
    Location
    Anchor Point, AK
    Tractor
    Satoh Bull S-630D

    Default Satoh Bull S630D Implements?

    Hi ALL!

    I recently purchased a Satoh Bull S-630D and am in the market for a couple of implements.

    First question,
    I was looking at picking up a rotary tiller for it, something like a 42"er by Land Pride. Will my tractor run this? The reason I ask is b/c the manual says the 1st PTO gear is 554 srpm. But I know that most standard equipment runs at 540 srpm. Will this be a problem? Also will most newer PTO Shafts connect to it, or will I be on the look out for a used one?

    Second question,
    I'm also looking for a Loader Bucket. The Tractor comes with a FEL but the bucket is a little beat up (that's the only problem on this thing). WIll I be able to buy a bucket for it? Or am I going to have to weld something up myself? Will any bucket fit to it. I know i would have to size it, but can I find one?

    I just don't have any experience with these tractors, kind of just fell into my lap and too good a deal to pass up. I bought the tractor mostly for turning compost and hauling dirt and manure around. But really would like to use a one-bottom plow and tiller with it. Thanks for any help!
    Rob
    Last edited by AKRob; 03-10-2013 at 05:30 PM.

  2. #2
    Gold Member
    Join Date
    Apr 2010
    Posts
    467
    Location
    Forfar, Ontario, Canada
    Tractor
    1947 Massey Harris 30, 1960 Massey Ferguson 35 (Perkins), 1995 TAFE 351DI, 1980 Bolens G174, 2005 Kubota B7510

    Default Re: Satoh Bull S630D Implements?

    Photos of your new trophy would be appreciated by all.

  3. #3
    New Member
    Join Date
    Mar 2013
    Posts
    5
    Location
    Anchor Point, AK
    Tractor
    Satoh Bull S-630D

    Default Re: Satoh Bull S630D Implements?

    Yeah I need to take some photos, I'll get on that as soon as I can. Anybody have any suggestions on what Implements?
    Last edited by AKRob; 03-10-2013 at 07:29 PM.

  4. #4
    Veteran Member
    Join Date
    Jun 2010
    Posts
    1,421
    Location
    Southern California
    Tractor
    International Harvester 284, Yanmar 1401D, Yanmar 240, and others...many others...

    Default Re: Satoh Bull S630D Implements?

    Your Buck has 22 PTO hp, and should run a 4 to 5 foot tiller well. Other 4 to 5 foot implements should be good choices too.

Similar Threads

  1. Satoh S630D Bull 3 Point
    By fsdan in forum Mitsubishi/Satoh
    Replies: 9
    Last Post: 04-08-2014, 08:51 AM
  2. Satoh S630D Bull Brakes
    By lynnetterenee in forum Mitsubishi/Satoh
    Replies: 1
    Last Post: 09-10-2011, 07:40 AM
  3. Satoh s630d Bull will not move after adding trans fluid
    By davblan in forum Mitsubishi/Satoh
    Replies: 3
    Last Post: 08-27-2008, 12:51 AM
  4. Satoh Bull S630D
    By kebran1 in forum Mitsubishi/Satoh
    Replies: 2
    Last Post: 01-28-2008, 10:43 AM
  5. SATOH S630D BULL CLUTCH PROBLEMS
    By reische in forum Mitsubishi/Satoh
    Replies: 0
    Last Post: 06-25-2007, 07:20 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.