Help with L3E engine

   / Help with L3E engine #1  

Pager450N

New member
Joined
Dec 23, 2014
Messages
3
Location
bountiful,ut
Tractor
John Deere 400 L3E diesel
I am currently rebuilding my L3E .952l model. I am running into a brick wall with finding parts. The #2 cyl was at 140 psi, so I decided to teardown and check things out. The 1st ring was out of round, see pic
gallery_53757_705_1176776.jpg

Since this has created an out of round wall, .010. I am looking for .025 over pistons and rings. I know that parts are expensive, but I am looking at almost $200 a piston with rings. So its out $600, and thats kinda steep for my blood.

Does anyone know if I can cross ref from other mitsubishi engines, or warehouse dist to possible get at cheaer price?
 
   / Help with L3E engine #2  
I usually use NCW Tractor Parts & Tractor Supply Store - Compact Tractor Parts for parts. They don't list the parts on their site but I'm sure they can quote you a price. $200 for a piston and rings sounds little steep but I've never rebuilt an L3E. I would have guessed about $80-90 on a piston and $50-60 on a set of rings. Pretty sure the L2E, K3C and K4C have a 70mm bore like the L3E but can't confirm that their pistons are all direct replacements to the L3E.
 
   / Help with L3E engine #3  
This is an old thread, But it might help somebody searching - like I was when it came up in my results.

I have had good service buying Mitsubishi parts here
Michael Beyer
Parts Department

9000 N. Kentucky Ave.
Evansville Indiana 47725
812.867.9900 office
812.867.2388 fax
EVAPAR | Power Products, Generators, Sales & Service
 
 
Top