Results 1 to 3 of 3
  1. #1
    New Member
    Join Date
    May 2006
    Posts
    18

    Default D1600 II Oil help

    What type oil do I use in the gearbox and how full should it be. I also discovered an oil leak where the brake linkage is going in to the axle on the right side. Is this just a seal or will I have to pull the whole thing apart.

    Jeremy

  2. #2
    Gold Member
    Join Date
    Mar 2005
    Posts
    254
    Location
    Talladega county, Sylacauga, AL
    Tractor
    Yanmar YM2020D Satoh Beaver III Yanmar 1500

    Default Re: D1600 II Oil help

    It is either 90w or utf (universial tractor fluid) if it is thin line 20w oil it is utf. It is is very thick oil it is 90w.
    leak is most likely a seal.

  3. #3
    Silver Member
    Join Date
    Jan 2002
    Posts
    239
    Location
    Roanoke, Va
    Tractor
    Satoh S470D

    Default Re: D1600 II Oil help

    Use 80w90 gear oil unless you have a loader. In that case use a quality tractor hydraulic oil. Level plug is on the right side of the transmission. Look for a bolt head in the middle of the case just behind the diff. lock pedal about half way up the side. You probably have a bad seal in the brake housing. Is not difficult to replace. For parts or manuals call toll free 1-800-609-5110. satohparts.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2013 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.