Tire Pressure/Cold R-1 3840

hlpdobro · 08-12-2008, 08:55 PM

I should know this. Darned if I can find the recommended cold tire pressure for R-1, 8-16 mounted on a 3840. Something in the range of 30-35lbs?

Thanks in advance.

h

chh · 08-13-2008, 11:22 PM

It should say somewhere on the tire something along the lines of; Max pressure for seating beads XX psi max load XXXX at XX psi. For a lugged Ag tire it is usually 35 for seating beads and 20 to 24 for use. On the sizes I use anyway.

hlpdobro · 08-17-2008, 11:08 AM

Thanks,

Tire guy had to slap a tube in there. Ran over something. Horse pastures can be dangerous places I suppose..

08-12-2008, 08:55 PM	#1 (permalink)
hlpdobro Member Join Date: Aug 2006 Location: Frederick Co MD Posts: 30	Tire Pressure/Cold R-1 3840 I should know this. Darned if I can find the recommended cold tire pressure for R-1, 8-16 mounted on a 3840. Something in the range of 30-35lbs? Thanks in advance. h __________________ - - - - - - HowardP Frederick Co MD Montana 3840/FEL So Much Manure...So Little Time

08-13-2008, 11:22 PM	#2 (permalink)
chh Platinum Member Join Date: Nov 2007 Location: Eastern OK Posts: 763	Re: Tire Pressure/Cold R-1 3840 It should say somewhere on the tire something along the lines of; Max pressure for seating beads XX psi max load XXXX at XX psi. For a lugged Ag tire it is usually 35 for seating beads and 20 to 24 for use. On the sizes I use anyway. __________________ Good judgment comes from experience, and a lot of that comes from bad judgment. Will Rogers The farmer is the only man in our economy who buys everything at retail, sells everything at wholesale and pays the freight both ways. John F. Kennedy

08-17-2008, 11:08 AM	#3 (permalink)
hlpdobro Member Join Date: Aug 2006 Location: Frederick Co MD Posts: 30	Re: Tire Pressure/Cold R-1 3840 Thanks, Tire guy had to slap a tube in there. Ran over something. Horse pastures can be dangerous places I suppose..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode