Page 1 of 2 12 LastLast
Results 1 to 10 of 15
  1. #1
    Bronze Member
    Join Date
    Nov 2008
    Posts
    52
    Tractor
    Deere 4100 & Deere 445

    Default Link between lift arm and 3 pt arm - where to find another?

    I'm referring to the part that you can crank up or down to adjust the pitch of your implement. The previous owner of mine welded it at a certain length, I presume because it was broken. Anyhow, according to messicks.com a new assembly is going to set me back over $550 for this minor problem. Where can I find one cheaper? I'm not as concerned about the brand name as I am a comparable unit that will fit, and it doesn't have to be brand new either. . .any suggestions???

  2. #2
    Elite Member JC-jetro's Avatar
    Join Date
    Jul 2006
    Posts
    3,194
    Location
    Kansas
    Tractor
    Ford 1700, Kubota MX-4700

    Default Re: Link between lift arm and 3 pt arm - where to find another?

    Quote Originally Posted by RMJ22 View Post
    I'm referring to the part that you can crank up or down to adjust the pitch of your implement. The previous owner of mine welded it at a certain length, I presume because it was broken. Anyhow, according to messicks.com a new assembly is going to set me back over $550 for this minor problem. Where can I find one cheaper? I'm not as concerned about the brand name as I am a comparable unit that will fit, and it doesn't have to be brand new either. . .any suggestions???
    TSC has the following Ford lift arm. I reckon you can use it jsut fine and will set you back a whopping $38. I have looked at it in our local TSC, it is pretty solid and even has a good Ford Blue paint

    JC,

    Lift Arm Leveling Assembly for Ford - 0267741 | Tractor Supply Company
    Ford 1700, 2wd.
    Kubota MX-4700DT, Gear transmission with LA 884 loader, Q/A and HD bucket.
    60" Woods Rotary Cutter, home made (3-pt boom and a Row Hipper) ,King Kutter( 5 ft Tiller,Middle Buster,Single Row Cultivator,Carry-all, 5 ft blade, 6 ft Landscaping Rake ,30" Dirt Scoop and a 4'x4' Drag Harrow)

  3. #3
    Advertiser sweettractors's Avatar
    Join Date
    Jul 2003
    Posts
    7,205
    Location
    Central Kentucky
    Tractor
    JD 6403 CHA-JD 3130 CHA

    Default Re: Link between lift arm and 3 pt arm - where to find another?

    Quote Originally Posted by RMJ22 View Post
    I'm referring to the part that you can crank up or down to adjust the pitch of your implement. The previous owner of mine welded it at a certain length, I presume because it was broken. Anyhow, according to messicks.com a new assembly is going to set me back over $550 for this minor problem. Where can I find one cheaper? I'm not as concerned about the brand name as I am a comparable unit that will fit, and it doesn't have to be brand new either. . .any suggestions???
    You can find one with the gearbox here: Cheap but excellent quality. Ken Sweet
    https://www.allpartsstore.com/index....rnumber=KY0900
    http://www.sweetfarms.com/

    Sweet Farm Equipment LLC (Internet Sales, Shipping All States)
    Shipping Facility
    1815 Defries Rd., Canmer, Ky 42722 Toll Free 1-866-528-3323
    Ken Sweet sweet@scrtc.com

    Shipping Example: Can ship 800 lbs from Ky. to Dallas for $165
    The Northeast shipping corridor is a little more expensive.

  4. #4
    Bronze Member
    Join Date
    Nov 2008
    Posts
    52
    Tractor
    Deere 4100 & Deere 445

    Default Re: Link between lift arm and 3 pt arm - where to find another?

    Thanks, you guys are the best!! Ken, I wasn't able to find what I'm needing navigating the site, is there anyway you might be able to provide a direct link, please?

  5. #5
    Advertiser sweettractors's Avatar
    Join Date
    Jul 2003
    Posts
    7,205
    Location
    Central Kentucky
    Tractor
    JD 6403 CHA-JD 3130 CHA

    Default Re: Link between lift arm and 3 pt arm - where to find another?

    Quote Originally Posted by RMJ22 View Post
    Thanks, you guys are the best!! Ken, I wasn't able to find what I'm needing navigating the site, is there anyway you might be able to provide a direct link, please?
    Maybe this is it. Ken Sweet
    https://www.allpartsstore.com/ItemDe...mNumber=8N577A
    http://www.sweetfarms.com/

    Sweet Farm Equipment LLC (Internet Sales, Shipping All States)
    Shipping Facility
    1815 Defries Rd., Canmer, Ky 42722 Toll Free 1-866-528-3323
    Ken Sweet sweet@scrtc.com

    Shipping Example: Can ship 800 lbs from Ky. to Dallas for $165
    The Northeast shipping corridor is a little more expensive.

  6. #6
    Silver Member
    Join Date
    Apr 2009
    Posts
    203
    Location
    Private, ID
    Tractor
    None

    Default Re: Link between lift arm and 3 pt arm - where to find another?

    I might happen to buy me one of them.

  7. #7
    Bronze Member
    Join Date
    Nov 2008
    Posts
    52
    Tractor
    Deere 4100 & Deere 445

    Default Re: Link between lift arm and 3 pt arm - where to find another?

    Thanks, I want one but I need to make sure it will work on mine! I see in the title it says "(RH)", does this indicate it is for the right-hand side? On my tractor the lift leveler is on the left side (when sitting on the seat). Will this still work?

  8. #8
    Advertiser sweettractors's Avatar
    Join Date
    Jul 2003
    Posts
    7,205
    Location
    Central Kentucky
    Tractor
    JD 6403 CHA-JD 3130 CHA

    Default Re: Link between lift arm and 3 pt arm - where to find another?

    Quote Originally Posted by RMJ22 View Post
    Thanks, I want one but I need to make sure it will work on mine! I see in the title it says "(RH)", does this indicate it is for the right-hand side? On my tractor the lift leveler is on the left side (when sitting on the seat). Will this still work?
    I have had customers put one on each side for easier hookup. Ken Sweet
    http://www.sweetfarms.com/

    Sweet Farm Equipment LLC (Internet Sales, Shipping All States)
    Shipping Facility
    1815 Defries Rd., Canmer, Ky 42722 Toll Free 1-866-528-3323
    Ken Sweet sweet@scrtc.com

    Shipping Example: Can ship 800 lbs from Ky. to Dallas for $165
    The Northeast shipping corridor is a little more expensive.

  9. #9
    Epic Contributor
    R.I.P.
    jinman's Avatar
    Join Date
    Feb 2001
    Posts
    21,014
    Location
    Texas - Wise County - Sunset
    Tractor
    NHTC45D, NH LB75B, Ford Jubilee

    Default Re: Link between lift arm and 3 pt arm - where to find another?

    Quote Originally Posted by RMJ22 View Post
    Thanks, I want one but I need to make sure it will work on mine! I see in the title it says "(RH)", does this indicate it is for the right-hand side? On my tractor the lift leveler is on the left side (when sitting on the seat). Will this still work?
    Yes, it will work. As Ken noted, you can put them on either/both sides. When I added TnT to my tractor, I put the tilt cylinder on the right arm and moved the adjustable arm to the left side. Note that the adjustable link Ken linked to is made to fit the Ford yoke in the lift arms. It's not a rotating ball link like many of the newer tractors have. If you have a Ford with the old-style lift arms, you can probably use this link just fine.
    Jim


  10. #10
    Epic Contributor Soundguy's Avatar
    Join Date
    Mar 2002
    Posts
    48,968
    Location
    Central florida
    Tractor
    ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC

    Default Re: Link between lift arm and 3 pt arm - where to find another?

    Quote Originally Posted by RMJ22 View Post
    Thanks, I want one but I need to make sure it will work on mine! I see in the title it says "(RH)", does this indicate it is for the right-hand side? On my tractor the lift leveler is on the left side (when sitting on the seat). Will this still work?
    don't worry.. your trctor ain't r or l handed..


    soundguy

Page 1 of 2 12 LastLast

Similar Threads

  1. Highest lift on 3 pt hitch
    By LHS Inc in forum John Deere Owning/Operating
    Replies: 15
    Last Post: 01-04-2011, 04:55 PM
  2. 3 pt. lift arm question
    By HJT in forum Kubota Owning/Operating
    Replies: 14
    Last Post: 12-18-2010, 07:55 PM
  3. 3000-20 3 pt lift links
    By KennedyDiesel in forum John Deere Owning/Operating
    Replies: 0
    Last Post: 11-26-2010, 03:11 PM
  4. 3 ph lift arm width on B7100
    By Bluelick in forum Kubota Owning/Operating
    Replies: 5
    Last Post: 08-26-2010, 09:49 AM
  5. JD 3 pt lift arms.
    By radman1 in forum John Deere Owning/Operating
    Replies: 11
    Last Post: 06-30-2010, 12:07 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
© 2014 TractorByNet.com. TractorByNet is a registered trademark of IMC Digital Universe, Inc. Other trademarks on this page are the property of their respective owners.